Driver Details

Fujitsu MHT2020AT (20GB) Mobile HDD, MHT2030AT (30GB) Mobile HDD, MHT2060AT (60GB) Mobile HDD, MHT2040AT (40GB) Mobile HDD, v.009B, A02

This software updates particular Fujitsu MHT2020AT, MHT2030AT, MHT2040AT, and MHT2060AT notebook hard drives to fix a potential Drive Not Ready issue.

- This release allows flashing of secondary master HDD and supports the following media:
- Diskette [BR64893.exe]
- Bootable Removable media (USB Flash Memory, Zip Drive, etc) [R64893.EXE]
- CD-R/RW [FJ009B.ISO].

Version

Version 009B, A02

Applies to

MHT2020AT (20GB) Mobile HDD;

Date

Release date
8/8/2003
Last Updated
11/3/2011

Importance

Optional. Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.

Available formats

File Format:Floppy
File Name:BR64893.exe
Download Type:HTTP
File Size: 757KB
Format DescriptionThis file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available

File Format:Hard-Drive
File Name:FJ009B.ISO
Download Type:HTTP
File Size: 2MB
Format DescriptionThis file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available

File Format:Hard-Drive
File Name:R64893.EXE
Download Type:HTTP
File Size: 370KB
Format DescriptionThis file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available

By downloading, you accept the terms of the Dell Software License Agreement.


Important Information

PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE. POWER OFF THE SYSTEM AFTER FIRMWARE UPDATE IS COMPLETED.

Fixes & Enhancements

Adding Azeda, may not be needed since new drives have latest FW

Installation instructions

For Diskette:

1) Click on (BR64893.exe). This will begin the diskette creation process.
2) Follow the instructions provided.
3) Insert a blank diskette when requested.
4) Once the diskette creation is complete, restart your system with the diskette inserted. (PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE)
5) The utility will identify your hard drive (Fujitsu MHT2020AT, MHT2030AT, MHT2040AT, and MHT2060AT) and require you to press "Y" & "Enter" to proceed. (The utility will NOT flash an unsupported model)
7) The utility will return you to an "A:\>" when complete.
8) Remove the diskette and restart your system.


For Removable media and bootable flash memory storage devices:

*** Removable media such as Zip Drive & USB Flash Memory must already contain system files to boot to DOS ***

1) The files contained in (R64893.EXE) should be extracted to a bootable media. The default extraction directory is C:\DELL\DRIVERS\R64893.
2) Once the files are extracted, copy the contents of C:\DELL\DRIVERS\R64893 directory to the bootable source.
3) Boot to that source. (PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE)
4) The utility will identify your hard drive (Fujitsu MHT2020AT, MHT2030AT, MHT2040AT, and MHT2060AT) and require you to press "Y" & "Enter" to proceed. (The utility will NOT flash an unsupported model)
5) The utility will exit and return to the prompt it was executed from when complete.


For bootable CD-ROM image:

*** CD-R/RW recording software must support *.ISO extension in order to use this image file. ***

1) Save the FJ009B.ISO to a known directory - recommend Desktop for easy access.
2) Start your CD-R/RW recording software software.
3) Locate the downloaded FJ009B.ISO.
4) Insert a blank CD-R/RW and start the recording process.
5) Restart the system and boot to the optical drive. (PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE)
6) The utility will identify your hard drive (Fujitsu MHT2020AT, MHT2030AT, MHT2040AT, and MHT2060AT) and require you to press "Y" & "Enter" to proceed. (The utility will NOT flash an unsupported model)
7) The utility will exit and return to the prompt it was executed from when complete.

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more