Driver Details

Dell PowerEdge T30 1.0.2 System BIOS

This package provides the BIOS update for Dell PowerEdge T30 running in the following Operating Systems: Windows and DOS

Fixes & Enhancements

Fixes:
1. Remove Suspend-to-RAM support.
Enhancements:
1. Refine USB Powershare behavior n BIOS setup menu.

Version

Version 1.0.2, 1.0.2

Category

BIOS

Release date

22 Feb 2017

Last Updated

22 Feb 2017

Importance

Available formats

File Format:Windows/DOS
File Name:PowerEdge_T30_1.0.2.exe
Download Type:HTTP
File Size: 8 MB
Format DescriptionThis file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
To ensure the integrity of your download, please verify the checksum value.
MD5:
1b7d927a9c9ce81845eff6fe5b3aa826
SHA1:
5514672738f88f8a3e6659cc309011446459f25b
SHA-256:
229e9362dbe8efbeaadb35d0c939f07503e76f189354512b6e7aefc308184b65

By downloading, you accept the terms of the Dell Software License Agreement.

Other versions
1.0.3,1.0.3 28 Apr 20177:26:11 AM
1.0.0,1.0.0 10 Nov 20165:47:09 AM
Applies to
PowerEdge BIOS
Installation instructions
BIOS Update Executable for Windows/DOS

Download
1. Click "Download File", to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.

Run the BIOS update utility from DOS environment, if Legacy Boot mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.

Perform the BIOS update from the BIOS Boot Menu, independent of operating system, if BIOS supported
1. Copy the downloaded file to a USB flash device. It does not need to be bootable.
2. Insert the USB flash device into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one time boot menu.
5. Select "BIOS Flash Update" in the "Other Options" section.
6. Click on the "..." button to browse the USB flash device to locate the downloaded file.
7. Select the file and click "Ok"
8. Confirm the Existing System BIOS Information and the BIOS Update Information are as expected.
9. Click "Begin Flash Update"
10. Reviewing the Warning message and click "Yes" to proceed with the update.
11. The system should restart and show a Flash Progress bar on the Dell logo screen as the BIOS update is being performed.
12. The system will restart once again when the Flash update is complete.
--------------------------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
Important Information
Before updating BIOS to 1.0.2, must upgrade Intel Graphic driver to 10.18.15.4279, A01, or above version to avoid blurred screen after resuming system from sleep stage. If blurred happens, please force to restart the computer then upgrade Intel Graphic driver to 10.18.15.4279, A01, or above version.
My download lists
Sign In

My Download List-#1


Drivers help and tutorials

x
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).