Driver Details

Dell Data Protection | Access -- Application Package

This package provides the Dell Data Protection | Access -- Application Package and is supported on Latitude, Precision and OptiPlex models that are running the following Windows Operating Systems: XP, Vista (32-bit) and Windows 7 (32-bit).

Version

  • Version 2.0.00001.001, A01

Applies to

�;

Date

Release date
04 Dec 2012
Last Updated
21 Mar 2014

Importance

Recommended. Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Available formats

File Format:Update Package for Microsoft® Windows®
File Name:APP_WIN_R300734.EXE
Download Type:HTTP
File Size: 87MB
Format DescriptionDell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
4CB926ABF6EBC9FFB9BFC243159925B8
SHA1:
Not available
SHA-256:
Not available
File Format:Hard-Drive
File Name:Dell_Data-Protection---Acces_A01_R300734.exe
Download Type:HTTP
File Size: 85MB
Format DescriptionThis file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
a1281be7c17c3017c8b43b4257a61c4f
SHA1:
26ebae9579165ebb61002031678c442e0dee29dc
SHA-256:
3b3019c723fa9a085a90220495dff66edacfbb632967d05f9345f5753c6b09f1

By downloading, you accept the terms of the Dell Software License Agreement.


Important Information

In order to install the Dell Data Protection | Access solution, you must install the Dell Data Protection | Access Pre-Requisite package, the Dell Data Protection | Access driver package and the Dell Data Protection | Access Middleware package before installing the Dell Data Protection | Application package.

For Systems configured with Dell ControlPoint Security Manager, please follow the instructions below to ensure proper and complete upgrade to Dell Data Protection | Access.

NOTE: Installation order is very important use the following procedure, including reboots, or the software will not function properly:
1. Backup any previously implemented security settings (if applicable)
a)Backup TPM keys and credentials (on Dell ControlVault enabled systems).
b)If you have any documents included in the Document Vault or Document Manager, remove these files. Dell Data Protection | Access does not contain this function and any data not removed from this feature will be lost.
c)Backup any user Private Information Manager account data.
2. Dell ControlPoint Security Manager must be uninstalled (if applicable)
a)Uninstall Dell ControlPoint Security Manager from Add/Remove Programs.
b)Reboot.
3. Dell Security Device Driver Pack must be uninstalled (if applicable)
a)Uninstall Dell Security Device Driver Pack from Add/remove programs.
b)Reboot.
4. Download the Dell Data Protection |Access software packages (Pre-Requisite(XP and Vista OS only), Driver, Middleware, and Application)
5. Install downloaded software in the order listed below
a)Install Dell Data Protection | Access Pre-Requisite package (XP and Vista OS only)
b)Reboot if requested.
c)Install Dell Data Protection | Access Driver package.
d)Install Dell Data Protection | Access Middleware package.
e)Reboot.
f)Install Dell Data Protection | Access Application package.
g)Reboot.
6. Clear any previously stored security settings implemented such as TPM enablement, fingerprints enrolled, BIOS passwords, preboot credentials, etc. (if applicable)
a)Launch Dell Data Protection |Access application.
b)Navigate to the advanced screen.
c)Click on Reset System and provide all implemented passwords and follow instructions appropriately.
7. Clear any previous non-ControlVault fingerprint enrollments (for Latitude E54x0 and E55x0 only systems)
a)Navigate to \Program Files\Dell\Dell Data Protection\Access\Drivers\Authentec AES2810 Fingerprint Reader\Tools folder and run AESReset.exe and follow instructions.
8. Clear any previous external fingerprint enrollments (if applicable)
a)For external fingerprint readers (Dell branded Fingerprint reader, Eikon 2 and Eikon to go readers), navigate to \Program Files\Dell\Dell Data Protection\Access\Advanced\Wave\Preboot Manager and execute the deleteusers.exe utility.
9. Restore your archived security settings backed up in Step 1 (if applicable)
Note: this will only restore archived TPM keys from USC 1.4 or DDPA 2.0 usage or preboot data which is enrolled within the Dell ControlVault.
a)Open Dell Access, navigate to the advanced screen, click on Credential Archive and Restore.
b)Click on Restore your security credentials.
c)Follow the wizard until completion.
10. Launch Dell Data Protection |Access application
a)Application will install into the Start Menu under Programs\Dell\Dell Data Protection\AccessNote: No desktop or task tray icons will be placed onto the system by default.
b)Upon first launch of Dell Data Protection | Access, the System Access Wizard will prompt you. This wizard will guide you through the system setup process. If the System Access Wizard does not automatically launch, you can start the wizard by selecting the Access tab and clicking on System.

Fixes & Enhancements

Fixes
- Not Applicable.

Enhancements
- Enhanced performance issues related to hard drive access when installed.

Installation instructions

Dell Update Package Instructions

Download

1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.

Hard Drive Installation (via WinZip) with Setup.exe File

Download

1.Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to disk and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file icon appears on your desktop.

Install

1.Double-click the new icon on the desktop
2.The Self-Extracting window appears and prompts you to extract or unzip to "C:\DELL\DRIVERS\0CNJ3". (Where '0CNJ3' is the name of the file to be downloaded). Write down this path so the executable (I.e.Setup.exe) file can be found later.
3. The Self-Extractor window appears.
4. Click OK.
5. After completing the file extraction, if the Self-Extractor window is still open, close it.
6. Click Start button and then click Run.
7. Type "C:\DELL\DRIVERS\0CNJ3" (where '0CNJ3" is the name of the file) in the Open textbox and then click OK.
8. Follow the on-screen installation instructions.

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more