Intel Centrino Wireless-N1030, 6230 Bluetooth 3.0+HS Application

This package provides the Intel Centrino Wireless-N1030, 6230 Bluetooth 3.0+HS Application and is supported on Inspiron, XPS, Alienware and Vostro models that are running the following Windows Operating System: Windows 7.

Fixes & Enhancements

- Fixed Bluetooth HP/headset/Mic show in sound tab w/o Bluetooth connected will cause DTM fail.
- Fixed Class driver wave failed for bluetooth device is enabled.
- Fixed KS Topology Test failed for bluetooth device is enabled.
- Fixed Class Driver KS Topology Test failed for bluetooth is enabled.
- Fixed Wave Test failed for bluetooth device is enabled.

- Enhanced Driver power management stability with WLAN 6230 attached.


Version, A03



Release date

25 Nov 2011

Last Updated

06 Dec 2013


Available formats

File Format:Hard-Drive
File Name:0PDK4_A03_ZPE.exe
Download Type:HTTP
File Size: 36 MB
Format Description:This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
Not available

By downloading, you accept the terms of the Dell Software License Agreement.

Applies to
Intel 6230 (BT3.0+HS)
Intel Centrino Wireless (Bluetooth Adapter)
Intel PROSet/Wireless BT Software Intel 6230 (BT3.0+HS)
Intel PROSet/Wireless BT Software Intel Intel 6230 (BT3.0+HS)
Intel PROSet/Wireless BT Software
Installation instructions
Hard Drive Installation (via WinZip) with Setup.exe File


1.Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to disk and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file icon appears on your desktop.

1.Double-click the new icon on the desktop
2.The Self-Extracting window appears and prompts you to extract or unzip to "C:\DELL\DRIVERS\0PDK4". (Where '0PDK4' is the name of the file to be downloaded). Write down this path so the executable (I.e.Setup.exe) file can be found later.
3. The Self-Extractor window appears.
4. Click OK.
5. After completing the file extraction, if the Self-Extractor window is still open, close it.
6. Click Start button and then click Run.
7. Type "C:\DELL\DRIVERS\0PDK4" (where '0PDK4' is the name of the file) in the Open textbox and then click OK.
8. Follow the on-screen installation instructions.
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).