INTEL Network 82599 Dual Port 10G firmware

INTEL Network 82599 Dual Port 10G firmware

Fixes & Enhancements

Revision History

1.1 Initial release to IBL.
1.2 Changes ASPM L1 default setting. Internal Testing only.
1.3 Corrected various bits in SFI image, posted to IBL.
1.6 Corrected LED bit settings in all images. Internal Testing only.
1.7 Corrected link mode setting bit in XAUI image. Corrected Wake bit default in all images. Add CX4 and Combined Backplane images. Internal Testing only.
1.8 Changed link mode setting in Combined Backplane image. Posted to IBL.
3.13 Changed IOV memory bars to prefetchable, Posted to IBL.
3.14 Including 10GBASE-T reference image. Posted to IBL.
4.09 Update images to include newest FW and various miscellaneous fixes, see Specification Update for details.
Add several new images, including management images:
Posted to IBL.
4.10 Update package include 82599EN image. All other images are unchanged, and are identical to what is contained in the 4.09 release. Posted to IBL.
4.21 Updated all images to 4.21 including the 82599EN. Posted to IBL.


Version 4.21, 4.21



Release date

13 Sep 2012

Last Updated

20 Sep 2012


Available formats

File Format:Floppy
File Name:82599_SFI_NO_MNG_FULL_4.21.exe
Download Type:HTTP
File Size: 851 KB
Format Description:This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
File Format:Plain-Text
File Name:EndUser LicenseAgreementType S_Rev. 040512.txt
Download Type:HTTP
File Size: 11 KB
Format Description:This file format contains plain text which can be viewed with a standard text editor.
To ensure the integrity of your download, please verify the checksum value.

By downloading, you accept the terms of the Dell Software License Agreement.

Other versions
4.09,4.09 19 Mar 20127:55:58 AM
Applies to
Dual-Port 10GE Daughter Mezzanine Adapter
Installation instructions
Step 1. Run "eeupdate /all" first.
The total Intel NIC devices in system will show as table below:

NIC BUS Dev Fun Vender-Device Branding String
=== === === === ============= ================================
1 1 00 00 8086-10C9 Intel(R) 82576 Gigabit Dual Port Connect
2 1 00 01 8086-10C9 Intel(R) 82576 Gigabit Dual Port Connect
3 2 00 00 8086-10FB Intel(R) 82599 10 Gigabit Dual Port Conn
4 2 00 01 8086-10FB Intel(R) 82599 10 Gigabit Dual Port Conn

Please be noticed that NIC controller of this add-on card is "8086-10FB" Intel(R) 82599 10 Gigabit Dual Port Connection.

Step 2. Run "eeupdate /DEVICE=10FB /D 82599_SFI_NO_MNG_FULL_4.21.txt" .
Please reboot system after flash completed.
***Warming*** It would cause system fatal error if input "DEVICE=10C9" in command above.

Reboot will be required
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).