This is 6Gb 6-Port SAS Daughter Card on Cloucts Products C6145 and PEC6100 and C6105

Fixes & Enhancements

Fix DellDiag tool SATA HDD buffer test issue


Version 2,2, 2,2



Release date

19 Mar 2012

Last Updated

07 Jul 2012


Available formats

By downloading, you accept the terms of the Dell Software License Agreement.

Other versions
2.4,2.4 25 Mar 20132:12:07 AM
Applies to
6-Port SAS 6Gb Daughter Mezzanine Card
Installation instructions
On-line flash
1.Please extract the file SAS2008v2.2(B1&B2)zip to a DOS bootable flash disk
2Boot to DOS by the bootable flash disk
301If LSI SAS 2008 already have fw
Please run f.bat to erase previous firmware & rom. and flash new fw&rom
02If LSI SAS 2008 fw is blank
Please change s.bat sasaddress(default: sas2flsh o sasadd 500a0d1000123457) , and run s.bat
4AC off
Off-line flash
U4 is 16MB flash (Spansion S29GL128P11TFI010)Please use U4 image (3712.bin) to flash it
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).