Get to know Windows 2012

Explore new features and learn how to get the most out of your Windows System

Learn more

Driver Details

Dell 180AS/2160AS Analog KVM Switch, v.1.0.3.3, A00

Updated firmware for the 180AS and 2160AS analog KVM switches and the supporting Server Interface Pods (SIPs).

Version

Version 1.0.3.3, A00 Other versions available
Other versions
01.00.03,A01-00 6/12/2006 4:07:56 PM

Compatibility

Operating Systems
  • Not Applicable

Applies to

180AS/2160AS Analog KVM Switch;

Date

Release date
4/6/2009
Last Updated
11/3/2011

Importance

Optional. Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.

Available formats

File Format:Hard-Drive
File Name:Dell_180AS-2160AS-Analog-KVM_A00_R173924.exe
Download Type:HTTP
File Size: 937KB
Format DescriptionThis file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
9bfd6949d776c1f02e7fba174f09289c
SHA1:
Not available
SHA-256:
Not available

By downloading, you accept the terms of the Dell Software License Agreement.


Fixes & Enhancements

Enhancement to enable recognition of PowerEdge M1000e blade server CMC module.

Installation instructions

Instructions for Dell_180AS-2160AS-Analog-KVM_A00_R173924.exe

Download

1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.


To upgrade firmware:
1. Connect the standard serial cable to a COM port on the server and to the serial connector on the back panel of the switch. Make a note of which COM port you have chosen, then turn on the switch.
2. Double-click to run the file WUpDateDELL.exe.
3. In the dialog box that displays, select the desired language and COM port.
4. Click Load. The update begins.
5. Once the firmware is updated, the following message displays: Download complete. Click Done to exit the dialog box.
6. The switch automatically reboots after the upgrade is completed.

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more