Driver Details

Dell PowerEdge Products C6220 & C6220 II RSTe Host RAID in support of Windows Server 2008 English 64 bit v3.1.0.1085

Dell PowerEdge Products C6220/C6220 II RSTe Host RAID support OS Windows Server 2008 English 64 bit

Fixes & Enhancements

1.Provides workaround for WD 6G SAS driver issue
2.Resolves GUI/driver installation errors if no drivers attached to AHCI controller
3.S3/S4 support enabled


Version, A01



Release date

17 Sep 2012

Last Updated

25 Sep 2013


Available formats

File Format:Floppy
File Name:PBG_RSTe_Drivers_GUI_CIM_CLI_3.1.0.1085_2012.04.24.exe
Download Type:HTTP
File Size: 29 MB
Format Description:This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
File Format:Plain-Text
File Name:EndUser LicenseAgreementType S_Rev. 040512.txt
Download Type:HTTP
File Size: 11 KB
Format Description:This file format contains plain text which can be viewed with a standard text editor.
To ensure the integrity of your download, please verify the checksum value.

By downloading, you accept the terms of the Dell Software License Agreement.

Supported Operating Systems
Windows Server 2008 R2
Applies to
PowerEdge C6220
Installation instructions
1. In windows , click and then select
2. Select System and Security
3. Select Device Manager
4. In other devices , will find the SAS Controller with a yellow warning symbol
5. Right click the SAS Controller and select Update Driver Software
6. Select Browse my computer for driver software
7. Select Browse to navigate where the driver resides
8. Navigate to where the driver is located and select the INF from the driver folder with that has the same OS version as the system . Click Install when the system promps a Windows Security warning .
9. After the driver software is installed successfully , click Close .
10. With the installation of the new driver , the system will prompt a warning to restart the computer , please select to reboot the system .
Important Information
1. SAS features are enabled on SATA/SAS Capable Controller if appropriate Intel(R) RAID C600 Upgrade Key is present in the system.
2. RAID 5 is no longer supported by SATA/SAS Capable Controller when SAS features are enabled.
3. Boot through expander is not supported in legacy mode.
4. SGPIO on AHCI Capable SATA Controller is disabled by default in order to support hibernation. Fix will be in a future release. The registry key
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStorA\Parameters\Device]LED_Supported"=dword:00000001" can be added but will disable hibernation.
5. Windows 2003 x86 installation is not supported. Fix will be in a future release.
6. The disk fault LEDs will not work when using the expander. Fix will be in a future release.
7. MPIO Load Balancing in RAID Mode is unsupported
8. A SAS Wide port spanning SCU0 and SCU1 is not supported.
9. Plugging both SCU into the same expander is not supported
My download lists
Sign In

My Download List-#1

Drivers help and tutorials

Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).