Driver Details

Seagate BARRACUDA (3.5",SATA,6Gb/s,7200,512) Firmware Update

This package provides Windows/DOS based firmware update for Seagate ST3160316AS/ST3250312AS/ST3320413AS/ST3500413AS/ST3750525AS/ST31000524AS (3.5",SATA,6Gb/s,7200,512) and is supported on Enterprise Servers, Alienware Desktop, XPS Desktop, Inspiron Desktop, Dimension, Powervault, OptiPlex, Cloud Products, Vostro, Precision, and Latitude models that are running the following Windows Operating Systems: XP, VISTA and Windows 7.

Version

Version JC47, A01

Applies to

Seagate Barracuda ST3160316AS;

Date

Release date
10/14/2013
Last Updated
3/21/2014

Importance

Recommended. Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Available formats

File Format:Hard-Drive
File Name:B765JC47.zip
Download Type:HTTP
File Size: 12MB
Format DescriptionThis file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
e9db934e5d5d15f02af1698f69b37614
SHA1:
Not available
SHA-256:
Not available

By downloading, you accept the terms of the Dell Software License Agreement.


Important Information

1) Please close other applications before updating.
2) While the firmware is updating, please don't turn off the computer.

Fixes & Enhancements

Fixes
-Not Applicable

Enhancements
- Enhanced the boot up detection
- Enhanced the Intel system detection

Installation instructions

Windows based firmware update for ST3320413AS/ST3500413AS/ST3750525AS/ST31000524AS:-
1. Download and unzip B765JC47.zip into your desktop.
2. In B765JC47 folder, please search for the Windows folder.
3. Double click B7032100.EXE and it will begin to run. On the first screen you will select your language, and then select OK. The next screen is a warning screen, please read and select Next if you agree. The next screen is the License Agreement screen. If you agree, click I agree and then click Next.
4. You will then come to the screen that asks you to close and save all applications and to back up your data. When you are ready to start the firmware update, please check the Begin firmware update procedure, and then click Proceed.
5. The system will reboot and load the firmware. Once the firmware update is complete the system will boot up into Windows normally.

DOS based firmware update for ST3160316AS/ST3250312AS/ST3320413AS/ST3500413AS/ST3750525AS/ST31000524AS:-
1. Unzip B765JC47.zip into your bootable USB key. Boot up the computer with USB key.
2. In Dos folder, just type JC47.BAT at the DOS prompt and press the enter key.
3. Your system will now start updating the HDD firmware. Once the firmware update is completed, your system will display a DRIVE PASSED message. If you already have the correct JC47 firmware on your hard drive, you will get a This drive already has this firmware. DRIVE FAILED TO LOAD the TARGET CODE message.
4. Remove your USB key, and turn off your system using the computers power button. Once the computer has been powered down, you can now turn the computer on normally.

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more