Driver Details


TL2000 and TL4000 library and drive firmware and ITDT-DCR.
Library Firmware = B.20
LTO5 Drive Firmware = BBNF
LTO4HHv2 Drive Firmware = BBNF
LTO4FH Drive Firmware = BBH4
LTO4HHv1 Drive Firmware = BBH5
LTO3HHv2 Drive Firmware = BBNF
LTO3FH Drive Firmware = 93GP
LTO3HHv1 Drive Firmware =93GQ

Fixes & Enhancements

Library improvements include:
- Fix for SNMP info for community names longer than 13 characters
- Proper library\drive response for a read failure on encrypted media

Several drive improvements and enhancements:
Several drive fixes which include:
- Stuck tape prevention
- I/O error recovery
- Error Reporting


Version B.20, A16


Tape Automation

Release date

10 Apr 2012

Last Updated

10 Mar 2014


Available formats

File Format:Hard-Drive
File Name:7MX39_ZPE.exe
Download Type:HTTP
File Size: 100 MB
Format Description:This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.

By downloading, you accept the terms of the Dell Software License Agreement.

Supported Operating Systems
Novell SuSE Linux ES 11
Windows Server 2008 x64
Red Hat Ent Linux 4
Red Hat Ent Linux 4.5
Red Hat Ent Linux 4.6
Suse Linux ES 9
Suse Linux ES 10
Red Hat Enterprise Linux 4.5
Not Applicable
Red Hat Ent Linux 4.7
Red Hat Ent Linux 5.2
Red Hat Enterprise Linux 6
Red Hat Ent Linux 5
Red Hat Ent Linux 5.1
Novell SuSE Linux ES 10
Windows Server 2008 x86
Windows Server 2003
Windows 2000
Windows Server 2008 R2
Windows Server 2003 x64
Applies to
Installation instructions
Hard Drive Installation (via WinZip) with HTML Pop-Up Window

1.Click Download Now, to download the file.
2.When the File Download window appears, click Save this program to
disk (Windows XP users, click Save) and click OK. The Save In: window
3.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4.If the Download Complete window appears, click Close. The file
name icon appears on your desktop.

1.Double-click the new icon on the desktop
The Self-Extractor window appears.
2.Click OK or Continue.
The Self-Extracting Driver Installation window appears and prompts to
extract files to C:\DELL\DRIVERS
3.Leave all of the default settings and click Unzip or OK. If the
directory doesn't exist, you'll be prompted to create one. Click Yes. A
Self Extractor window appears and indicates C:\DELL\DRIVERS files were
4.Click OK.
Follow the on-screen installation instructions in the window.

HTML Pop-Up With Install Now Button
1.The Dell Software Installation Documentation window appears.
2.Click the Install Now button. A File Download window appears.
3.Click Run this program from its current location and click OK.
The Security Warning window appears.
4.Click Yes. The InstallShield Wizard window appears.
5.Follow the on-screen instructions.
Important Information
Dell PowerVault TL2000/TL4000 will change unique ID when the library firmware is upgraded from 5.80 or earlier to 6.60 or later. This change is a result of the IPv6 DOD implementation. As a result of the FIRMWARE upgrade the library will acquire a new IP address if set in DHCP mode; please ensure user has access to the library Operator Control Panel (OCP) in order to acquire the new DHCP address. This change will not affect libraries set for static IP addresses.
Dell PowerVault TL4000/2000 drive firmware release implemented Federal Information Processing Standards (FIPS), The LT04 and LTO5 drive firmware now contains a digital signature. Drive firmware signature is transparent to the user and backup application. The signature provides protection against firmware or device tampering; as a result a firmware upgrade to an unsigned firmware version is prohibited. If you require assistance, please contact Dell technical support.
Provides support for the new Library Controller Board (LCB)
See Dell PowerVault A07 Release Notes December'08 file for a full release details
To install ITDT, a suitable version of Java is required for both Windows and Linux.


The default install location for the current release of ITDT has changed in Linux based installations.

The previous destination was: /opt/dell/dvtd/jre Whereas the current default location is: /opt/dell/itdt_dcr/jre

The symbolic link creation example for ITDT in Section 2.1 of the readme file should be:

$ ln -sf /opt/IBMJava2-142/jre /opt/dell/itdt_dcr/jre Sun Microsystems JRE:
$ ln -sf /usr/java/j2re1.4.2_09 /opt/dell/itdt_dcr/jre
My download lists
Sign In

My Download List-#1

Drivers help and tutorials

Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell highly recommends applying this update as soon as possible. The update contains changes to improve the reliability and availability of your Dell system.