Conexant D110,MDC,1.5,v.92, v.7.12.9.0, A01
AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.Hermes MDC 1.5 Windows XP & 2K Driver V7.12.9.0
Recommended
Find the best download for your system
Please enter your product details to view the latest driver information for your systemSearch support
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Version 7.12.09 Fix:
Blue screen during install on ICH using WinXP SP2.
Unable to connect dialing into some RAS servers.
Improve V90 throughput performance.
Driver Installation in Spanish
Version 7.12.08 Fix:
Com application locks after resume from Hibernate
Italy cadenced dial tone failed detection
+PQC setting cannot be set to "3" through the SDK
V.44 Compression cannot be disabled through the SDK
Azalia INF files need to be updated for Security entries
Version 7.12.07 Fix:
Intermittent failure (about 4%) to establish connection on a specific dual PCM (pair gain) line.
New Feature: Add possibility to limit the maximal transmission rate for V.90 or V.34 modualtion depending on a specific region.
Version 7.12.06 Fix:
Intermittent failure (about 10%) to establish connection vs I-Courier server.
Version 7.12.05 Fix:
System crash when rolling back from a newer modem driver to the original Windows XP inbuild modem driver.
System locks up after resumption from the system stand-by state when modem device is in the D3 device state and the "Allow this device to bring the computer out of standby." checkbox is unchecked in the Power Management tab of the Modem Property page.
Loopback test (AT&T1) fails using the QA+Win32 testing application if modem is connected to the phone line.
Intermittent system crash (file Hsf_dp.sys) when establishing connection in answer mode using the V.22bis modulation.
The receiption level is too low when using the MDC 1.5 board.
Failure to hear call progress in the fax mode.
New Feature: The third byte of the SPEEDADJUST registry entry is used to control the connection rate aggressiveness for the V.34 modulation.
Read MoreBlue screen during install on ICH using WinXP SP2.
Unable to connect dialing into some RAS servers.
Improve V90 throughput performance.
Driver Installation in Spanish
Version 7.12.08 Fix:
Com application locks after resume from Hibernate
Italy cadenced dial tone failed detection
+PQC setting cannot be set to "3" through the SDK
V.44 Compression cannot be disabled through the SDK
Azalia INF files need to be updated for Security entries
Version 7.12.07 Fix:
Intermittent failure (about 4%) to establish connection on a specific dual PCM (pair gain) line.
New Feature: Add possibility to limit the maximal transmission rate for V.90 or V.34 modualtion depending on a specific region.
Version 7.12.06 Fix:
Intermittent failure (about 10%) to establish connection vs I-Courier server.
Version 7.12.05 Fix:
System crash when rolling back from a newer modem driver to the original Windows XP inbuild modem driver.
System locks up after resumption from the system stand-by state when modem device is in the D3 device state and the "Allow this device to bring the computer out of standby." checkbox is unchecked in the Power Management tab of the Modem Property page.
Loopback test (AT&T1) fails using the QA+Win32 testing application if modem is connected to the phone line.
Intermittent system crash (file Hsf_dp.sys) when establishing connection in answer mode using the V.22bis modulation.
The receiption level is too low when using the MDC 1.5 board.
Failure to hear call progress in the fax mode.
New Feature: The third byte of the SPEEDADJUST registry entry is used to control the connection rate aggressiveness for the V.34 modulation.
Version
7.12.9.0, A01
Release date
17 Nov 2004
Download Type
Driver
Category
Modem/Communications
Importance
RecommendedDell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Available formats
File Format: ZipPack External
File Name: R81459.EXE
File Size: 1.47 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
By downloading, you accept the terms of the Dell Software License Agreement.
Supported Operating Systems
Windows 2000
Windows XP
Applies to
D110,MDC,1.5,v.92
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.