Dell PowerConnect M8024-K, Firmware Version 5.1.4.5,A14
Restart requiredAUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "PowerConnect_5.1.4.5_Release_Notes".
Please follow software update instructions included in the zip file - "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.4.5 Firmware.pdf".
Recommended
Find the best download for your system
Please enter your product details to view the latest driver information for your system
Search support
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier.Show me how
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes available in this release:
CaseID Summary 772696 DNSE - 5.1.3.7 - PC7024P Power negotiation fails with Cisco 9971 IP Phone 697710 PC81xx v5.1.1.7 Unable to restore config via GUI - 6248 - unable to restore config via http 735779 UNH - IPv6 - 5.1.1.7 - Duplicate Address Detection issue 755551 BSR action shutdown functionality is not working. 747017 PC8024 v5.1.2.3 cpldTest command reports a fan control error 755368 DNSE - 5.1.3.7 - show tech-support output is incomplete and overwritten by "show arp" entries. 755422 DNSE - 5.1.3.7 - Error reported when generating 2nd self-signed certificate from CLI 755550 PC8132f - Vlan 230 is down with physical interfaces associated for that vlan is up 755891 Show mac address-table command is crashing the switches 762521 DNSE - 5.0.1.3 - Mellanox ConnectX-3 Mezz card fails to link with M8024-k 759809 DNSE - 5.1.3.7 - ICMP Redirect status of VLAN is enabled when "no ip redirects" applied globally 746010 PC81xx v5.1.2.3 error reported when importing a certificate via GUI 774761 Unwanted print and error log is seen when we configure ip address on loop back interface. 779021 Image and Config download using HTTP through HTTP session is failing in all the platforms except PC8100 series. 777664 warning message is not shown when ports of different speed are added in port-channel using interface range command. 779687 Error message is shown though SSL certificate import is successful via GUI in pop-up window. 697710 PC81xx v5.1.1.7 Unable to restore config via GUI 781003 DNSE - PC8100 Stack - ipMapProcessingTask crash 697710 PC81xx v5.1.1.7 Unable to restore config via GUI 781102 Update WRL kernel binary with the XLP unaligned access patch for NetLogic processors
Enhancements available in this release:
CaseID Summary 687354 NTP to support RFC4330 683992 Add storm control action support for broadcast and multicast streams 770272 Add "show running-config interface all" command
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
CaseID Summary 772696 DNSE - 5.1.3.7 - PC7024P Power negotiation fails with Cisco 9971 IP Phone 697710 PC81xx v5.1.1.7 Unable to restore config via GUI - 6248 - unable to restore config via http 735779 UNH - IPv6 - 5.1.1.7 - Duplicate Address Detection issue 755551 BSR action shutdown functionality is not working. 747017 PC8024 v5.1.2.3 cpldTest command reports a fan control error 755368 DNSE - 5.1.3.7 - show tech-support output is incomplete and overwritten by "show arp" entries. 755422 DNSE - 5.1.3.7 - Error reported when generating 2nd self-signed certificate from CLI 755550 PC8132f - Vlan 230 is down with physical interfaces associated for that vlan is up 755891 Show mac address-table command is crashing the switches 762521 DNSE - 5.0.1.3 - Mellanox ConnectX-3 Mezz card fails to link with M8024-k 759809 DNSE - 5.1.3.7 - ICMP Redirect status of VLAN is enabled when "no ip redirects" applied globally 746010 PC81xx v5.1.2.3 error reported when importing a certificate via GUI 774761 Unwanted print and error log is seen when we configure ip address on loop back interface. 779021 Image and Config download using HTTP through HTTP session is failing in all the platforms except PC8100 series. 777664 warning message is not shown when ports of different speed are added in port-channel using interface range command. 779687 Error message is shown though SSL certificate import is successful via GUI in pop-up window. 697710 PC81xx v5.1.1.7 Unable to restore config via GUI 781003 DNSE - PC8100 Stack - ipMapProcessingTask crash 697710 PC81xx v5.1.1.7 Unable to restore config via GUI 781102 Update WRL kernel binary with the XLP unaligned access patch for NetLogic processors
Enhancements available in this release:
CaseID Summary 687354 NTP to support RFC4330 683992 Add storm control action support for broadcast and multicast streams 770272 Add "show running-config interface all" command
(1) Download the zip file - PCM8024kv5.1.4.5a14.zip (2) Extract the image file "PCM8024kv5.1.4.5.stk" from the zip file (3) Install the image to the switch by following the upgrade procedure "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.4.5 Firmware.pdf" extracted from zip file.
Reboot will be required
Need help with network connection issues?
Find a solution in Dell's network troubleshooting and usage guide.