Dell PowerEdge PEC8000 FCB firmware

Dell PowerEdge PEC8000 FCB firmware

Fixes & Enhancements

1. Over later BMC V1.27 can compatible FCB V2.07
2. Fix BITS049573 [FC] FC didn't show correct update value via Mib browser
3. Fix BITS049630 [FC] SNMP psuConfiguration should include 1+1, 2+0 ,2+1, 3+1, 22, 4+0 , current is 4+2,5+1 .
4. Fix BITS051066 [FC] Sometimes PSU presence detect deasserted and asserted when plug out PSU power cord
5. Add inlet temperature debounce, when FCB reads inlet temperature is larger than 10 degree c compared with previous reading, it will print debug message, drop reading, re-initialize AT73C508 and re-read gain. When debug console command set inlet_tmp 0, it will also re-initialize AT73C508 again.
6. Remove ODM string in FW update utility


Version 2.07, 2.07


Embedded Server Management

Release date

06 Feb 2013

Last Updated

06 Feb 2013


Available formats

File Format:Floppy
File Name:Zeus_FCB_Software.02.07.exe
Download Type:HTTP
File Size: 1 MB
Format Description:This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
File Format:Plain-Text
File Name:EndUser LicenseAgreementType S_Rev. 040512.txt
Download Type:HTTP
File Size: 11 KB
Format Description:This file format contains plain text which can be viewed with a standard text editor.
To ensure the integrity of your download, please verify the checksum value.

By downloading, you accept the terms of the Dell Software License Agreement.

Other versions
1.09,A00 31 Aug 20128:32:10 AM
Applies to
Power Edge C8000
Installation instructions
1. IPMI Driver or OpenIPMI Driver should be enabled in Linux and

2. Run with Batch file.
execute dos.bat to update FCB.

execute to update FCB.

execute win.bat to update FCB.

Reboot will be required
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).