Dell iDRAC Monolithic release V1.95

iDRAC6 V1.95

Fixes & Enhancements

- Creating a partition from an image failed intermittently with Dell supported 8 GB SD card.
- Cannot create Certificate Signing Request (CSR) with remote and local RACADM.
- Cannot perform firmware update using the Web interface with Internet Explorer 10 browser.
- Cannot upload an SSH public key using command racadm sshpkauth if the key does not end with an "=" or "==" at the end of the key string.
- RAC serial redirect prompts for user credential when cfgSerialConsoleNoAuth is enabled.
- Power monitoring graph is not visible in iDRAC6 Web interface with Internet Explorer 10 browser.
- If the user password has (?) character, access is denied for WSMAN commands.
- In iDRAC6 express configuration console/media tab is listed in the system page. The Console/media tab must not be available in iDRAC6 express configuration.
- If is ON on the management station and Virtual Console is launched, and then if any letter is pressed small case letter isdisplayed. If is OFF and any letter is pressed, then Capital letter is displayed.
- The racadm vmdisconnect command from local and Remote racadm displays an error while disconnecting Remote File Share (RFS) attached media-"Error:No Virtual media devices are currently connected". But the media is connected through RFS before executing the command.
- In the iDRAC Web interface -> System Summary page -> Server Health section, the Power Supplies component health status displays as critical health instead of warning health in the absence of redundant power supply.
- Hardware inventory page in iDRAC Web interface displays information for two Power Supply Units (PSUs) when only one is present.
- Broadcom NIC Firmware Version in the iDRAC Web interface -> System Inventory page is not listing the correct version.
- Lifecycle Controller version is not displayed in the iDRAC Web interface System Summary and System Details pages.


Version 1.95, A00


Embedded Server Management

Release date

21 Feb 2013

Last Updated

04 Nov 2016


Available formats

File Format:Update Package for Microsoft® Windows®
File Name:ESM_Firmware_CMDN0_WN32_1.95_A00.EXE
Download Type:HTTP
File Size: 57 MB
Format Description:Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
To ensure the integrity of your download, please verify the checksum value.
File Format:Rel-Notes-PDF
File Name:iDRAC6_1.95_A00_ReleaseNotes.pdf
Download Type:HTTP
File Size: 120 KB
Format Description:This format consists of an archive of PDF files used to provide help and procedural information to the customer. It is necessary to install the Adobe Acrobat Reader first to view the files in this archive.
To ensure the integrity of your download, please verify the checksum value.
File Format:Application
File Name:iDRAC6_1.95_A00_FW_IMG.exe
Download Type:HTTP
File Size: 48 MB
Format Description:Application
To ensure the integrity of your download, please verify the checksum value.

By downloading, you accept the terms of the Dell Software License Agreement.

Other versions
2.90,A00 25 Jul 20174:34:29 PM
1.90,A00 26 Jun 20128:13:17 PM
1.85,A00 21 Feb 20124:17:22 PM
Installation instructions

1. Click Download Now to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.

Reboot will be required
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell highly recommends applying this update as soon as possible. The update contains changes to improve the reliability and availability of your Dell system.