QLogic Dell 2342M - FC HBA, v.1.54, A00

QLogic Dell 2342M - FC HBA, v.1.54, A00

Fixes & Enhancements

Software Components

* Updated firmware to version 3.03.23.

* Added code to allow configuring the first drive/LUN when
connected to a switch with the BIOS enabled when
the selectable boot is disabled.

* Changed code to continue checking for LUNS when TUR
returns illegal request status.

* Added NVRAM option (host_params) to enable support
for EV boot order.

* Added code to support qlutil.

Bug Fixes

The following fixes have been made to the BIOS for 2Gb FC HBAs
between versions 1.52 and 1.54.

* Fixed bug that checked for ASC=4 and ASCQ =2 after
TUR instead of ASC=4 and ASCQ =1.


Version 1.54, A00


Fibre Channel

Release date

06 Dec 2011

Last Updated

07 Jul 2012


Available formats

File Format:Hard-Drive
File Name:dell_2342mbios154.exe
Download Type:HTTP
File Size: 255 KB
Format Description:This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
Not available

By downloading, you accept the terms of the Dell Software License Agreement.

Other versions
1.52,A00 11 Apr 20076:58:11 AM
Supported Operating Systems
Red Hat Ent Linux 3
Windows Server 2008 x64
Red Hat Ent Linux 4
Suse Linux ES 9
Suse Linux ES 10
Red Hat Ent Linux 5
Windows Server 2008 x86
Windows Server 2003
Windows Server 2003 x64
Applies to
Dell 2342M - FC HBA
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.