Driver Details

Windows 2003 Driver for Dell PERC S300 Adapter, PERC S300 Integrated Modular, PERC S100 Integrated, RMSD_PERC S100 Integrated, v.2.0.0.0162, A05

Windows Server 2003 S100/S300 Controllers

Version

Version 2.0.0.0162, A05 Other versions available
Other versions
1.0.1.0021,A04 1/12/2012 4:34:04 AM

1.0.0.0086,A03 12/7/2011 1:05:00 PM

Applies to

PERC S100 Integrated;

Date

Release date
2/4/2013
Last Updated
5/25/2013

Importance

Recommended. Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Available formats

File Format:Update Package for Microsoft® Windows®
File Name:SAS-RAID_Driver_D1RP4_WN32_2.0.0.0162_A05.EXE
Download Type:HTTP
File Size: 5MB
Format DescriptionDell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
a6a0882b4c25c18a73f10289daeaed80
SHA1:
4a21e38611636da13cb758b6183afd9790b48e48
SHA-256:
Not available

File Format:Rel-Notes-Text
File Name:R294493.txt
Download Type:HTTP
File Size: 4KB
Format DescriptionThis file format contains plain text which can be viewed with a standard text editor.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
0041ec6fe92e68503c3f0fde0783ca20
SHA1:
Not available
SHA-256:
Not available

By downloading, you accept the terms of the Dell Software License Agreement.


Important Information

- Only a single ODD is supported as a boot device. Up to two ODDs can be supported on a system. - When installing an S300, make sure the S100 is disable in the platforms BIOS. The ODD will not function if S100 is active with S300. - W2K3 SP2 or later required for S100 and S300. NOTE! Windows 2003 R2 is not supported. - The BCRAID.SYS and BCCFG.SYS drivers both need to be updated when performing an update using the Zip Pack. Each driver is updated manually. - OM 6.2.0 or higher required to manage S100 and S300 controllers.

Fixes & Enhancements

- Background Array Scan

- Boot to RD1000 Tape

- Consistency Check startup on existing virtual disks after a new virtual disk is created

- Default VD cache policy is changed to "No caching"

- Support for CougarPoint chipset for S100

- New System support for S300: Coaster, Diamas and Skipper, Slinky

- UEFI boot enablement

Installation instructions

Dell Update Package Instructions

Download
1. Click Download Now to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.

Zip Files

Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click OK to extract files. After the files are extracted the message all files were successfully unzipped will appear.
5. Click OK to exit from the installer.

Installation
1. Copy extracted files to media accessible to Windows.
2. Reboot system to Windows OS.
3. Follow Server Manager->Device Manager->Storage Controller, click on the PERC Controller.
5. Click on Update Driver Software and follow the prompts to update the driver.
4. Reboot system for changes to take effect.

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more