Get to know Windows 2012

Explore new features and learn how to get the most out of your Windows System

Learn more

Driver Details

Seagate SAS ST91000640SS and ST9500620S firmware version AS05

This release contains firmware version AS05 for Seagate SAS (7.2K rpm 2.5 SAS) 500GB and 1TB Hard Drives. Dell. Vendor model numbers ST91000640SS and ST9500620S.

Version

Version AS05, A04

Compatibility

Operating Systems
  • Novell SuSE Linux ES 11
  • MS Windows 2008 x64
  • Red Hat Ent Linux 4.5
  • Red Hat Ent Linux 4.6
  • Suse Linux ES 9
  • Suse Linux ES 10
  • Red Hat Ent Linux 4.7
  • Red Hat Ent Linux 5.2
  • Red Hat Ent Linux 6
  • Red Hat Ent Linux 5
  • Novell SuSE Linux ES 10
  • MS Windows 2008 x86
  • MS Windows Server 2003
  • MS Windows 2008 R2
  • MS Windows 2003 x64

Applies to

SEAGATE Constellation.2 500GB SAS 7.2K RPM;

Date

Release date
7/12/2013
Last Updated
7/12/2013

Importance

Recommended. Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Available formats

File Format:Update Package for Microsoft® Windows®
File Name:SAS-Drive_Firmware_DPVD9_WN32_AS05_A04.EXE
Download Type:HTTP
File Size: 5MB
Format DescriptionDell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
2a4361206f78b742483bc3ccc3503de3
SHA1:
117c2b34447adc3d6c428d60c1062639ce6b6c8e
SHA-256:
Not available

By downloading, you accept the terms of the Dell Software License Agreement.


Important Information

This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.

This update will run on drives remaining in a RAID set that is in a Offline state.

There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.

Fixes & Enhancements

Resolves issue with lower performance under high workloads with large temperature gradients
Resolves rare issue that can cause lower write performance during a background media scan
Improves drive error handling
Enhanced drive long term reliability and robustness

Installation instructions

Dell Update Package Instructions:

Download

1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.

Installation

1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.



1) Click Download now.
The File Download window appears.

2) Click the Save button.
The Save As window appears.

3) Select Desktop using the drop-down menu to the right of Save in.

4) Click the Save button.
A progress meter moves as the download is completed.

5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.

6) Double click the Icon on your desktop for the newly saved file.
The Dell Bios Release Notes window appears.

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more