Dell PowerEdge C5220 System Firmware 1.14

This is C5220 BMC version 1.14 for update.

Fixes & Enhancements

1. Add Sensor Reading: Power Input/Output Consumption


Version 1.14, A02


Embedded Server Management

Release date

19 Sep 2012

Last Updated

19 Sep 2012


Available formats

File Format:Update Package for Microsoft® Windows®
File Name:C5220_ESM_Firmware_G5W32_WN32_1.14_A02.EXE
Download Type:HTTP
File Size: 13 MB
Format Description:Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
To ensure the integrity of your download, please verify the checksum value.
File Format:Plain-Text
File Name:EndUser LicenseAgreementType S_Rev. 040512.txt
Download Type:HTTP
File Size: 11 KB
Format Description:This file format contains plain text which can be viewed with a standard text editor.
To ensure the integrity of your download, please verify the checksum value.
File Format:Floppy
File Name:PEC5220BMC114.exe
Download Type:HTTP
File Size: 14 MB
Format Description:This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.

By downloading, you accept the terms of the Dell Software License Agreement.

Applies to
Dell BMC Firmware
PowerEdge C5220 Mother Board
Installation instructions
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.

execute dos.bat to update BMC.
Important Information
1. Please note: The "Preserve Configuration" switch (-c 1) should not be used if flashing from a BMC firmware version earlier than 1.14. Doing so could result in Power Input/Output Consumption sensors not be added appropriately so that the feature to get PSU Input/Output Consumption will be not workable.
2. The released file s81kxxxM.bin is used for:
i.Use socflash.exe under DOS to update.
ii.Use flash writer to pre-program FW into flash before mount on MB in Factory.
3. The release file s81kxxx.bin is used for upgrading BMC firmware by using web console or kcsflash utility.
i.Before using web console or kcsflash utility to upgrade firmware, please make sure the MB fru is exist in the EEPROM.
ii.After finished firmware upgrade, please do AC off and AC on process.
4. Essential data programming flow for L10 Vendor.
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).