Driver Details

Seagate Momentus Thin 2.5",SATA,3Gb/s,7200,512e Firmware Update

This package provides the Windows/DOS based firmware update for Seagate Momentus Thin 2.5",SATA,3Gb/s,7200,512e (ST320LT007-9ZV142/ST250LT007-9ZV14C/ST160LT007-9ZV14D) and is supported on OptiPlex, Precision, Latitude, Inspiron and Vostro Notebook models that are running the following operating systems: XP, Vista, Window 7 and DOS.


  • Version 0005DEM1, A05


Compatible Systems
Supported Operating Systems
  • MS Windows 7 32-bit
  • MS Windows 7 64-bit
  • MS Windows Vista 32-bit
  • MS Windows Vista 64-bit
  • MS Windows XP
  • MS Windows XP x64

Applies to

Seagate ST160LT007-9ZV14D;


Release date
16 Oct 2013
Last Updated
28 Mar 2014


Recommended. Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Available formats

File Format:Hard-Drive
Download Type:HTTP
File Size: 8MB
Format DescriptionThis file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.

By downloading, you accept the terms of the Dell Software License Agreement.

Important Information

1. The utility will not work if the disks are configured in RAID mode.
2. Please close other applications prior to the utility execution.
3. While executing the utility, please don't turn off the computer.
4. This windows console application can be used to check if a given disk supports Advanced Format (AF) feature.
5. The application fails and returns an error if the disk number does not refer to an IDE disk.
6. For Win8 and onwards, please use the Dell Paragon Alignment Tool v4.0 Utility for Advanced Format (AF) Detection.

Fixes & Enhancements

- Not Applicable.

- Improved the hard drive response after the system has been idle for long hours.
- Enhanced read/write interaction.

Installation instructions

Windows based firmware update for ST320LT007-9ZV142/ST250LT007-9ZV14C/ST160LT007-9ZV14D:-
1. Download and unzip into your desktop.
2. In JUL5DEM1 folder, please search for the Windows folder.
3. Double click M7016032.EXE and it will begin to run. On the first screen you will select your language, and then select OK. The next screen is a warning screen, please read and select Next if you agree. The next screen is the License Agreement screen. If you agree, click "I agree" and then click Next.
4. You will then come to the screen that asks you to close and save all applications and to back up your data. When you are ready to start the firmware update, please check the "Begin firmware update procedure", and then click Proceed.
5. The system will reboot and load the firmware. Once the firmware update is complete the system will boot up into Windows.

DOS based firmware update for ST320LT007-9ZV142/ST250LT007-9ZV14C/ST160LT007-9ZV14D:-
1. Unzip and copy it into your bootable USB key. Boot up the computer from the USB key.
2. Change directory (cd) to JUL5DEM1\Dos, type 0005DEM1.BAT and press the enter key.
3. Your system will now start updating the HDD firmware. Once the firmware update is completed, firmware update completion message will be displayed.
4. Remove your USB key, and turn off your system using the computers power button. Once the computer has been powered down, you can now turn the computer on.

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more