Seagate Momentus Thin 2.5",SATA,3Gb/s,7200,512e Firmware Update

This package provides the Windows/DOS based firmware update for Seagate Momentus Thin 2.5",SATA,3Gb/s,7200,512e (ST320LT007-9ZV142/ST250LT007-9ZV14C/ST160LT007-9ZV14D) and is supported on OptiPlex, Precision, Latitude, Inspiron and Vostro Notebook models that are running the following operating systems: XP, Vista, Window 7 and DOS.

Fixes & Enhancements

- Not Applicable.

- Improved the hard drive response after the system has been idle for long hours.
- Enhanced read/write interaction.


Version 0005DEM1, A05


Serial ATA

Release date

15 Jun 2012

Last Updated

28 Mar 2014


Available formats

File Format:Hard-Drive
Download Type:HTTP
File Size: 8 MB
Format Description:This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.

By downloading, you accept the terms of the Dell Software License Agreement.

Compatible Systems
Supported Operating Systems
Windows 7, 32-bit
Windows 7, 64-bit
Windows Vista, 32-bit
Windows Vista, 64-bit
Windows XP
Windows XP, 64-bit
Applies to
Seagate ST160LT007-9ZV14D
Seagate ST250LT007-9ZV14C
Seagate ST320LT007-9ZV142
Installation instructions
Windows based firmware update for ST320LT007-9ZV142/ST250LT007-9ZV14C/ST160LT007-9ZV14D:-
1. Download and unzip into your desktop.
2. In JUL5DEM1 folder, please search for the Windows folder.
3. Double click M7016032.EXE and it will begin to run. On the first screen you will select your language, and then select OK. The next screen is a warning screen, please read and select Next if you agree. The next screen is the License Agreement screen. If you agree, click "I agree" and then click Next.
4. You will then come to the screen that asks you to close and save all applications and to back up your data. When you are ready to start the firmware update, please check the "Begin firmware update procedure", and then click Proceed.
5. The system will reboot and load the firmware. Once the firmware update is complete the system will boot up into Windows.

DOS based firmware update for ST320LT007-9ZV142/ST250LT007-9ZV14C/ST160LT007-9ZV14D:-
1. Unzip and copy it into your bootable USB key. Boot up the computer from the USB key.
2. Change directory (cd) to JUL5DEM1\Dos, type 0005DEM1.BAT and press the enter key.
3. Your system will now start updating the HDD firmware. Once the firmware update is completed, firmware update completion message will be displayed.
4. Remove your USB key, and turn off your system using the computers power button. Once the computer has been powered down, you can now turn the computer on.

Reboot will be required
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).