Driver Details

Micron C400 32GB/64GB/128GB/256GB mSATA Firmware Update

This package provides the Micron C400 32GB/64GB/128GB/256GB mSATA Firmware Update and is supported on the Alienware Notebook, Inspiron, Latitude, OptiPlex, Precision, Vostro and XPS models that are running Windows series operation systems.

Version

  • Version 04MH, A00-00

Compatibility

Operating Systems
  • MS Windows 7 32-bit
  • MS Windows 7 64-bit
  • MS Windows 8 32-bit
  • MS Windows 8 64-bit

Applies to

Micron RealSSD mSATA;

Date

Release date
04 Mar 2013
Last Updated
21 Mar 2014

Importance

Optional. Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.

Available formats

File Format:ALL
File Name:Micron C400 mSATA 04MH.zip
Download Type:HTTP
File Size: 1MB
Format Description
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
011eab49f8d2a66aa5ba3bda53fc2704
SHA1:
c8a726c6715ea37c691e0db562435c2d8ddaac15
SHA-256:
3e2d8a35c2a4748f89b0f3d6b65a6e8f392ff632a85c77e5b1dae113f212764b

By downloading, you accept the terms of the Dell Software License Agreement.


Important Information

1. Equipment needed, a CD drive, a blank CD
2. Do not POWER OFF the system during the firmware update procedure
3. Please perform a full system backup before starting the firmware update procedure (highly recommended)
4. Connect your notebook to a AC power supply during the firmware update procedure (highly recommended)
5. The firmware utility tool is OS independent.

Fixes & Enhancements

Fixes:
- Fixed issues where SSD may not be detected after a previous forced power cycle.

Enhancements:
- Enhanced the device ready time, allowing system to be able to power up quickly.

Installation instructions

Backup

1. It is highly recommended that full system backup be completed before starting this firmware upgrade procedure

Download and image extraction

1. Click Download to download the zipped file
2. Extract the file into a folder
3. The ISO image file is used to burn the utility onto a bootable CD

Installation

1. Ensure that your notebook is plugged into a AC power supply during the update process (high recommended)
2. DO NOT remove power from the system during the firmware update process
3. Ensure that your BIOS has been set to ATA or AHCI mode. DO NOT select RAID mode. This utility will not work in RAID mode
4. Ensure that your BIOS boot order has been set up to boot from CD drive
a. You can do so by either pressing F12 during the boot up and then select CD drive to boot from
b. Or by pressing F2 during the boot up, enter the boot order selection and select CD drive to boot from. Save the setting before exiting
5. Insert the bootable CD media with ISO image into yoursystem
6. Reboot the system from the bootable CD media, the firmware update utility will be started automatically
7. Connected Micron SSD drive that is eligible for the firmware update will be shown on the screen
8. Select Yes to the request for 'Update firmware on this drive?'
9. DO NOT power off the system during the update process, the update will take about 30 to 60 seconds. Some systems may require a longer time to complete.
10.Upon completion, the message 'Current Firmware is : 04MH' will be displayed.

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more