OptiPlex 9010 System BIOS

Dell OptiPlex 9010 System BIOS

Fixes & Enhancements

1.Address deep sleep mode issue.
2.Address USB issue.

Version

Version A12, A12

Category

BIOS

Release date

25 Jan 2013

Last Updated

21 Mar 2014

Importance

Available formats

File Format:Windows/DOS
File Name:O9010A12.exe
Download Type:HTTP
File Size: 8 MB
Format Description:This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
To ensure the integrity of your download, please verify the checksum value.
MD5:
8b000c49fe69e718915af4e3a63977f1
SHA1:
2cd6ecffa70d4937bb76ca51beb453dae13157cb
SHA-256:
9143e9d5fc8bbaf9bea627006d38d43cf6d5bd1c1cc71f319414588ede2f5b5a

By downloading, you accept the terms of the Dell Software License Agreement.

Applies to
Dell OptiPlex 9010
Installation instructions
Download file to Desktop
The file O9010A12.exe is using the Universal (Windows/ DOS) format and is designed to be directly executed from Windows environment.
1. Click Download now.The File Download window appears.
2. Click the Save button.The Save As window appears.
3. Select Desktop using the drop-down menu to the right of Save in.
4. Click the Save button.A progress meter moves as the download is completed.
5. If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.

NOTE: Shut down all other applications prior to running the BIOS update utility. The update utility reboots your system in order to
get the new BIOS loaded.
--------------------------------------------------------------------------------
Run the BIOS update utility from Windows environment
1. Double click the Icon on your desktop labeled O9010A12.exe.The Dell BIOS Flash window appears
2. Click the Continue button.The message Pressing OK will closeall applications, shut down Windows,
Flash the BIOS, then reboot. appears.
3. Click the OK button.The system will restart and the BIOS Flash will be completed.

Run the BIOS update utility from DOS environment (Non-Windows users)
NOTE: You will need to provide a bootable DOS diskette. This executable file does not create the DOS system files.

1. Copy the file O9010A12.exe to a bootable USB key.
2. Boot from the USB key to the DOS prompt.
3. Run the file by typing Y:\O9010A12.exe (where y is the drive letter where the executable is located).

--------------------------------------------------------------------------------
Note: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you doesn't enable BitLocker on your system you can ignore it.

Reboot will be required
x
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).