Driver Details

DELL,SRV,SW,OEM-ID,,A00

'OEM ID' for 12G OEMReady.

Fixes & Enhancements

Fixes: BIOS DUP upgrade issue ( on linux OS , when updating one system at a time) for Factory shipped OEM Ready System.

Enhancement:
Added '1 to many' install support for OEM ID ( using PM DUP).

Version

Version 1.01, A00

Release date

20 Feb 2013

Last Updated

20 Feb 2013

Importance

Optional

Available formats

File Format:Update Package for Microsoft® Windows®
File Name:Identity-Module_Application_KTYXF_WN32_1.01_A00.EXE
Download Type:HTTP
File Size: 7MB
Format DescriptionDell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
c6590fb8c87ce58bfbac732c12ef223e
SHA1:
d3ed0d9436319ce86ee058dd62254ec4b7be21c4
SHA-256:
d60083e35a96989cd55cd08b23aef4c2b6876a3e0813a66275b2ee0d31050792
File Format:Board Service Utility
File Name:KTYXF_R320_CustBSU_1_01.exe
Download Type:HTTP
File Size: 164KB
Format DescriptionBoard Service Utility
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
bcd6f8817cee1bd69862c9eda9434ffc
SHA1:
95edbd9725cf33ad756c82917bdca188da85126e
SHA-256:
84219d38454c390aaf922b3974db60e3b49c3e1f24d9e0d3ee8025716f5b47d4
File Format:Application
File Name:KTYXF_R320_Cust_1_01.exe
Download Type:HTTP
File Size: 164KB
Format DescriptionApplication
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
99e913789fcf9b01e3717d5d65df419f
SHA1:
85609a789a54f508b907e3048179e4df620d7b8c
SHA-256:
69894e92476bffad9c0088b82c571aaac2c2bae8c8ea64f4c91388b7c3791a40

By downloading, you accept the terms of the Dell Software License Agreement.

Compatible Systems

Supported Operating Systems

Not Applicable

Applies to

Identity Module

Installation instructions

******************* "Cust" ( Customer ) exe *******************

PREPARATION:
1) Ensure system is already Debranded and the file is for your platform.
2) Note any iDRAC user settings that are important for your specific usage. 'Reset iDRAC to Default Settings' is needed for this installation and will set iDRAC user settings ( outside Identity Module) to revert to Std Dell Defaults.

INSTALLATION:
1) Ensure Identity Module's exe file does not have "BSU" ( Board Service Util) in its file name.
2) Extract .pm from the zip pack exe.
3) Login to iDRAC web GUI , navigate to 'Update and Rollback' link on left pane.
4) Using 'Firmware Update' tab, browse to the "Cust" .pm file and upload it.
5) Under the 'Update Details' section, select your .pm file. Ensure 'Current' and 'Available' revisions are as expected.
6) Click 'Install' button.
7) Go to 'Job Queue' tab and wait for your install job to change from 'New' to 'Completed'.
8) Navigate to 'Troubleshooting' link on left pane. Click on 'Diagnostic' tab on right. Click on 'iDRAC rest to Default Settings' link. Note: This step will set V4 DHCP to Std Dell's default value of disabled.
Wait for iDRAC reboot to complete ( about 4 minutes ).Enable V4 DHCP (assuming that was current setting).
11) Reboot the system.Wait for System to complete followed by one more self-reboot before you see updated BIOS splash logo.
12) Verify that the tab -->'System Inventory' --> 'Firmware Inventory' shows 'Identity Module' as a component with new revision.
13) Verify the Branding changes ( on iDrac GUI and System) are working.
14) Restore ( if any ) iDRAC user settings that were noted during 'Preparation' above.

******************* 'Identity Module DUP' ( aka PM DUP). *******************

Note:
1) None of the below methods using DUP are supported for users upgrading from OEMReady rev 1.0 to rev 1.01. These are listed here for
those users trying to switch back to rev 1.01 from a later revision of OEM Ready.
2)For users upgrading from OEMReady revision 1.0, using "Cust" .pm file is the only supported method.
3) All below methods are for updating installed Identity Module and not for Fresh Install.

PREPARATION:
1) Ensure you have IdentityModule DUP for the appropriate 12G platform and that your system is already Debranded using atleast OEMReady Identity Module revision 1.01.
2) Ensure you have iDRAC revision 1.30.30 or later and Lifecycle Controller revision 1.1.1.18 or later.
3) Ensure you have appropriate windows or Linux IdentityModule DUP matching your OS.

INSTALLATION ( OS DUP method ) :

1) Refer to "Dell Update Packages Version 7.2 User's Guide" or later found on Dell's support site http://www.dell.com/support/home .

INSTALLATION ( Remote Enablement method):
1) Please request latest '12G_Dell_OEM_IdentityModule_One_to_Many_Update" document from Dell OEM team.

INSTALLATION ( iDRAC GUI method):

Note: Only windows DUP are supported for this method.
1) Login to Idrac GUI. Navigate to 'Update and Rollback' link and using "Firmware Update" tab, browse to the windows DUP on your machine.
2) Upload the windows DUP and confirm "Package successfully downloaded" message under 'Update details'.
3) Click on 'Install next reboot' or 'Install and Reboot' button as appropriate.
4) Navigate to 'Job Queue' page and confirm that the job completed.
5) Let the iDRAC reboot complete ( depending upon install option you chose in step 3).
6) Reboot host.
7) Verify the Branding changes ( on iDrac GUI and System) are working.

******************* "Cust BSU ".exe (Board Service Utility) *******************

Important Notes:
1. This utility should only be used for installing after motherboard replacement and by Dell OEM Service team ( using 'MotherBoard Replacement' steps).
Use of this utility for other purposes may render the current application inoperable.
Please consult your support/services before using this utility.

Important Information

OEMReady Identity Module.
1) This revision of Identity Module is recommended along with at least iDRAC 1.30.30, LC 1.1.1.18, and BIOS 1.4.5.

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more
This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details
Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.