Driver Details

XPS ONE 2710 System BIOS

XPS ONE 2710 A10 BIOS for Windows 7 and Windows 8

Fixes & Enhancements

You may run A10.exe if you are already updated to A09 BIOS.

01. Update BIOS copyright string from 2012 to 2013.
02. Fix BIOS flash UI behavior.
03. Fix the table lost of ACPI.

Version

Version A10, A10

Release date

22 Jan 2013

Last Updated

22 Jan 2013

Importance

Recommended

Available formats

File Format:Non-Packaged
File Name:A10.EXE
Download Type:HTTP
File Size: 12MB
Format DescriptionThis file format consists of a BIOS-executable file. To use it, download the file and copy it to a DOS-bootable USB flash drive, then boot the system to the USB flash drive and run the program.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
995f80883af52a4acfd1423d5a863f96
SHA1:
b83bb271dbb61d37025eb8f970af8e76811f6d15
SHA-256:
26fdb3646bd25c4be82996029c960cce7d4007855816f256f5a29042343240d3

By downloading, you accept the terms of the Dell Software License Agreement.

Other versions

X28,X28 29 May 201210:49:11 AM

Compatible Systems

Supported Operating Systems

BIOS

Applies to

Dell XPS One 2710

Installation instructions

1. Boot into Windows.
2. Copy A10.EXE onto your desktop.
3. Execute A10.EXE by double click it.
4. Click Update when BIOS Update Program dialogue box pop up.
5. Make sure you don't interrupt the update process.
6. Do not turn off power or disconnect AC power source before update complete.
7. Press Yes to confirm the BIOS version you want to update and to start BIOS Update process.
8. Press Yes and then system will restart after BIOS update complete.

Important Information

Please run A10.exe directly if you already updated the BIOS to A06, A08 or A09.

Attention! Once you upgraded the BIOS to A10. Please DO NOT downgrade the BIOS to any older version.
Note! The SATA mode will be changed to AHCI after you flash the BIOS if your system BIOS is A08 or older.
This BIOS will automatically detect SATA configuration and set to the correct mode accordingly when you click loading defaults as this --- BIOS Setup > Exit > Load Defaults;
Please DO RUN 'Load Defaults' after you update BIOS.
Be careful: That BIOS settings will be load to defaults except 'Boot Mode', 'Secure Boot Control' and 'Load Legacy OPROM'.

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more
This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details
Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).