Driver Details

XPS ONE 2710 System BIOS

XPS ONE 2710 A08 BIOS for Windows 7 and Windows 8

Version

Other versions
X28,X28 29 May 201210:49:11 AM

Compatibility

Operating Systems
  • BIOS

Applies to

Dell XPS One 2710;

Date

Release date
14 Jan 2013
Last Updated
14 Jan 2013

Importance

Recommended. Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Available formats

File Format:Non-Packaged
File Name:A08.EXE
Download Type:HTTP
File Size: 12MB
Format DescriptionThis file format consists of a BIOS-executable file. To use it, download the file and copy it to a DOS-bootable USB flash drive, then boot the system to the USB flash drive and run the program.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
cbc7d40a7ff0ddeef726ff97e263db3b
SHA1:
11582135cefc929b09bcb5c104e1872bc40a1e06
SHA-256:
45d3ef5b6b6452c9455d71f2c9ea7b4fea258ad38feeab387ff28ed3b020f39b

By downloading, you accept the terms of the Dell Software License Agreement.


Important Information

Please run A08.exe directly if you already updated the BIOS to A06.

Attention! Once you upgraded the BIOS to A08. Please DO NOT downgrade the BIOS to any older version.
Note! The SATA mode will be changed to AHCI after you flash the BIOS.
Please check the SATA mode in BIOS setup menu before BIOS update. It must be changed back to correct SATA mode for your system. Such as the system has RAID support by default, the SATA mode must be changed to RAID after BIOS update if it is not set to RAID correctly. You would refer to the following steps to change the SATA mode setting.
1. Power on the system -> 2. Press F2 to enter BIOS setup menu --> 3. Go to the "Advanced" page --> 4. Choose "Onboard Device Configuration"--> 5. Enter "SATA Mode" to change the mode which you need --> 6. Press F10 Save and Reset

Fixes & Enhancements

Update Intel VBIOS and GOP driver

Installation instructions

1. Boot into Windows.
2. Copy A08.EXE onto your desktop.
3. Execute A08.EXE by double click it.
4. Click Update when BIOS Update Program dialogue box pop up.
5. Make sure you don't interrupt the update process.
6. Do not turn off power or disconnect AC power source before update complete.
7. Press Yes to confirm the BIOS version you want to update and to start BIOS Update process.
8. Press Yes and then system will restart after BIOS update complete.

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more