Driver Details

Dell ControlVault Firmware Update

This package provides Dell ControlVault Firmware Update and is supported on Latitude and Precision models that are running the following Windows Operating Systems: XP, Vista and Windows 7.


  • Version 14.x.132.0, A17

Applies to



Release date
30 Jun 2010
Last Updated
13 Dec 2013


Recommended. Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Available formats

File Format:Hard-Drive
File Name:Dell_ControlVault_A17_R267128.exe
Download Type:HTTP
File Size: 5MB
Format DescriptionThis file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
Not available
Not available
Not available

By downloading, you accept the terms of the Dell Software License Agreement.

Important Information

1. The latest Dell Driver Pack must be installed in order for the USHUPGRADE to communicate with the USH.
2. "Application configuration is incorrect" is a result of an old driver pack being installed.
3. The USHUPGRADE is not a stand alone application.
4. It requires all files contained in the firmware directory to update the USH firmware.
5. The files USHUPGRADE uses depend on the particular system.
6. The USHUPGRADE can only be run by a user with Administrator privileges.
7. If running from Vista with User Account Control (UAC) enabled, the USHUPGRADE must be run as an Administrator.
8. GETTING STARTED - Please refer to the \firmware\readme.txt file for advanced command line options and result codes.

Fixes & Enhancements

- Not applicable.

- Enhanced firmware upgrade robustness if aborted.
- Enhanced to Fingerprint sensor reset algorithm.
- Enhanced RFID config file on single system to improve RFID performance.

Installation instructions

Hard Drive Installation (via WinZip) with Setup.exe File


1. Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to disk and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file icon appears on your desktop.


1. Double-click the new icon on the desktop.
2. The Self-Extracting window appears and prompts you to extract or unzip to "C:\DELL\DRIVERS\NGCT1". (Where 'NGCT1' is the name of the file to be downloaded). Write down this path so the executable (I.e.Setup.exe) file can be found later.
3. The Self-Extractor window appears.
4. Click OK.
5. After completing the file extraction, if the Self-Extractor window is still open, close it.
6. Click Start button and then click Run.
7. Type "C:\DELL\DRIVERS\NGCT1" (where 'NGCT1' is the name of the file) in the Open textbox and then click OK.
8. Follow the on-screen installation instructions.

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more