Driver Details

Dell ControlVault Firmware Update

This package provides Dell ControlVault Firmware Update and is supported on Latitude and Precision models that are running the following Windows Operating Systems: XP, Vista and Windows 7.

Fixes & Enhancements

Fixes
- Not applicable.

Enhancements
- Enhanced firmware upgrade robustness if aborted.
- Enhanced to Fingerprint sensor reset algorithm.
- Enhanced RFID config file on single system to improve RFID performance.

Version

Version 14.x.132.0, A17

Release date

30 Jun 2010

Last Updated

13 Dec 2013

Importance

Recommended

Available formats

File Format:Hard-Drive
File Name:Dell_ControlVault_A17_R267128.exe
Download Type:HTTP
File Size: 5MB
Format DescriptionThis file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available

By downloading, you accept the terms of the Dell Software License Agreement.

Supported Operating Systems

MS Windows 7 32-bit
MS Windows 7 64-bit
MS Windows Vista 32-bit
MS Windows Vista 64-bit
MS Windows XP
MS Windows XP x64

Applies to

ControlVault

Installation instructions

Hard Drive Installation (via WinZip) with Setup.exe File

Download

1. Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to disk and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file icon appears on your desktop.

Install

1. Double-click the new icon on the desktop.
2. The Self-Extracting window appears and prompts you to extract or unzip to "C:\DELL\DRIVERS\NGCT1". (Where 'NGCT1' is the name of the file to be downloaded). Write down this path so the executable (I.e.Setup.exe) file can be found later.
3. The Self-Extractor window appears.
4. Click OK.
5. After completing the file extraction, if the Self-Extractor window is still open, close it.
6. Click Start button and then click Run.
7. Type "C:\DELL\DRIVERS\NGCT1" (where 'NGCT1' is the name of the file) in the Open textbox and then click OK.
8. Follow the on-screen installation instructions.

Important Information

Requirements
1. The latest Dell Driver Pack must be installed in order for the USHUPGRADE to communicate with the USH.
2. "Application configuration is incorrect" is a result of an old driver pack being installed.
3. The USHUPGRADE is not a stand alone application.
4. It requires all files contained in the firmware directory to update the USH firmware.
5. The files USHUPGRADE uses depend on the particular system.
6. The USHUPGRADE can only be run by a user with Administrator privileges.
7. If running from Vista with User Account Control (UAC) enabled, the USHUPGRADE must be run as an Administrator.
8. GETTING STARTED - Please refer to the \firmware\readme.txt file for advanced command line options and result codes.

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more
This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details
Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).