Seagate SAS ST9146803SS and ST9300603SS firmware version FS62

This release contains firmware version FS62 for Seagate SAS (10K rpm 2.5" SAS) 146GB and 300GB Hard Drives. Vendor model numbers ST9146803SS and ST9300603SS.

Fixes & Enhancements

Supports updating Seagate SAS (10K rpm 2.5" SAS) 146GB and 300GB Hard Drives to 6Gb SAS compliance.

Version

Version FS62, A02

Category

SAS Drive

Release date

06 Dec 2011

Last Updated

03 Jun 2015

Importance

Available formats

By downloading, you accept the terms of the Dell Software License Agreement.

Applies to
HD, 146G, SAS6, 10K, 2.5, SGT, FRFLY
HD, 300G, SAS6, 10K, 2.5, SGT, FRFLY
Installation instructions
Download

1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.

Installation

1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
x
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).