Driver Details

Intel Rapid Storage Technology 9.5, v.9.5.0.1037, A00

null

Version

  • Version 9.5.0.1037, A00

Compatibility

Systems
Operating Systems
  • MS Windows 7 64-bit

Applies to

Rapid Storage Technology 9.5;

Date

Release date
08 Jan 2010
Last Updated
03 Nov 2011

Importance

Recommended. Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Available formats

File Format:Hard-Drive
File Name:R245418.exe
Download Type:HTTP
File Size: 417KB
Format DescriptionThis file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available

By downloading, you accept the terms of the Dell Software License Agreement.


Important Information

For per-installation using F6 method only:
1. Double click the Release exe file(RXXXXXX.exe) to extract all driver files from the installation package.

2. Create a floppy* containing the following files in the root
directory:
iaAhci.inf, iaAhci.cat,
iaStor.inf, iaStor.cat,
iaStor.sys, and
TxtSetup.oem.

* Note: For Windows 7 you can use a floppy, CD/DVD or USB.

3. For Windows 7:

- During the operating system installation, after selecting the
location to install Windows 7, click Load Driver to install a third
party SCSI or RAID driver.

- Continue to step 4.

4. When prompted, insert the media (floppy, CD/DVD
or USB) you created in step 2 and press Enter.

5. At this point you should be presented with a selection
for one of the controllers listed in the Overview (Section 1)
of this document depending on your hardware version and
configuration.

6. Highlight the selection that is appropriate for the
hardware in your system and press Enter.

7. Press Enter again to continue. Leave the floppy disk in
the system until the next reboot as the software will
need to be copied from the floppy disk again when setup
is copying files.

Fixes & Enhancements

Initial Release

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more