ATI Hyper Memory PCI-Express X16 (DVI/VGA/TV out) Radeon X300 SE, v.113-A62801-106, A02

* ATI Radeon X300 SE firmware update for customers who are experiencing a blank screen issue with the Dell UltraSharp 2005FPW 20.1-inch Wide Aspect Flat Panel LCD. (Customers with other monitors should not apply this update.)

* A brief description of the firmware update procedure:
1) Turn your system off before changing the monitor cable.
2) The 2005FPW blank screen issue only occurs if you use the DVI cable (white connector). Connect the VGA cable (blue connector) to your system and disconnect the DVI cable (white connector).
3) Turn your system on. Complete the setup process if this is your first time to turn the system on.
4) Download R103296.exe to your hard drive.
5) Double-click on this utility (R103296) to unzip the files.
6) When all files have been successfully unzipped, click the OK button to start the update.
7) The ATIWinflash utility appears and asks you to close all other applications before continuing.
8) Click the CONTINUE button when you're ready.
9) In the next few minutes, the ATIWinflash program will update your firmware.
10) During this time, your keyboard and mouse will not respond until the process is complete.
11) When your VBIOS has been successfully programmed, click the OK button to restart your system.

Fixes & Enhancements

Adresses no video issue with Dell UltraSharp 2005FPW 20.1-inch Wide Aspect Flat Panel LCD. This release is intended for customers with the 2005FPW display. Only customers with the 2005FPW panel should update to this BIOS.


Version 113-A62801-106, A02



Release date

24 Jun 2005

Last Updated

03 Nov 2011


Available formats

File Format:Hard-Drive
File Name:R103296.EXE
Download Type:HTTP
File Size: 363 KB
Format Description:This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
Not available
Not available
Not available

By downloading, you accept the terms of the Dell Software License Agreement.

Applies to
Hyper Memory PCI-Express X16 (DVI/VGA/TV out) Radeon X300 SE
Installation instructions
Hard Drive Installation (via WinZip) with Setup.exe File for R103296.EXE

1.Click Download Now, to download the file.
2.When the File Download window appears, click Save (Windows XP
users will click Save) this program to disk and click OK. The Save In:
window appears.
3.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4.If the Download Complete window appears, click Close. The file
icon appears on your desktop.

1.Double-click the new icon on the desktop labeled R103296.EXE.
2.The Self-Extracting window appears and prompts you to extract or
unzip to C:\DELL\DRIVERS\R103296. Write down this path so the executable (I.e.
Setup.exe) file can be found later.
3.The Self-Extractor window appears.
4.Click OK.
5.After completing the file extraction, if the Self-Extractor
window is still open, close it.
6.Click the Start button and then click Run.
7.Type C:\DELL\DRIVERS\R103296 in the Open textbox and then click OK.
8.Follow the on-screen installation instructions.
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.