Get to know Windows 2012

Explore new features and learn how to get the most out of your Windows System

Learn more

Driver Details

TEAC DV-28EC 8X Slim DVD, v.D.4G, A02

This is a DOS based firmware flash utility that will update the TEAC DV-28EC DVD-ROM (Dell Part number W3131) firmware from revision D.4B or D.4E to firmware revision D.4G.

Fixes & Enhancements

Firmware D.4G

-Resolves an issue seen with imaging software where the user is able to boot to CD or DVD media but is unable to select the hard drive image on the CD or DVD media.

Version

Version D.4G, A02

Release date

16 Nov 2005

Last Updated

03 Nov 2011

Importance

Optional

Available formats

File Format:Hard-Drive
File Name:R110082.EXE
Download Type:HTTP
File Size: 245KB
Format DescriptionThis file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available

By downloading, you accept the terms of the Dell Software License Agreement.

Supported Operating Systems

Microsoft MS-DOS
Red Hat Ent Linux 2.1
Red Hat Linux 6.2
Red Hat Linux 7.0
Red Hat Linux 8.0
Red Hat Linux 9.0
Novell Netware
MS Windows Server 2003
MS Windows NT 4.0
MS Windows 2000
MS Windows 2003 x64

Applies to

DV-28EC 8X Slim DVD

Installation instructions

Instructions for R110082.EXE

Download

1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.



Note: You will need to provide a bootable DOS Floppy diskette or a bootable DOS Memory Key.
This package does not contain DOS system files.

Warning! Do not power cycle system during Firmware Flash Process.

Firmware Flash Procedure

1. Copy the files extracted from the Zip package to a bootable DOS Floppy diskette or a bootable DOS Memory Key.

2. Boot to the bootable DOS Floppy diskette or bootable DOS Memory Key.

3. The autoexec.bat will initialize the firmware flash process.

4. Press the "Enter" key to begin flashing the drive.

5. When the firmware flash completes successfully remove the bootable DOS Floppy diskette or bootable DOS Memory Key.

6. Power cycle the System.

Important Information

The executable will extract files needed to flash the drive in a DOS environment. These files need to be copied to a bootable DOS Floppy diskette or bootable DOS Memory Key. The executable does not create MS-DOS system files. This flash will update the drive's firmware to D.4G. You must remove the bootable Floppy diskette or bootable Memory Key and power cycle the system before using the drive.

If the firmware re-flash fails (e.g., system hangs, etc.), power cycle the system and try again.

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more
This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details
Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.