Dell Workgroup Laser 5210n, v.E211, A03

Engine firmware update for Dell Mono Laser 5210N

Fixes & Enhancements

- Added feature to allow disabling tray-linking
- Added feature to reverse the tray order during tray linking
- Address slight toner leak when the printer is first powered on
- Improved time-to-first-print for some printers at low AC line voltage
- Added feature to reduce "922.04 Service Fuser" error when the printer is operating below the proper temperature.


Version E211, A03



Release date

20 Jul 2007

Last Updated

03 Nov 2011


Available formats

File Format:Hard-Drive
File Name:LS_ST_E211_upd_eng.fls
Download Type:HTTP
File Size: 1 MB
Format Description:This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
Not available
Not available

By downloading, you accept the terms of the Dell Software License Agreement.

Supported Operating Systems
Windows 98
Windows Vista, 32-bit
Windows Millennium Edition (Me)
Windows Server 2003
Windows NT 4.0
Windows 2000
Windows Vista, 64-bit
Windows XP
Windows XP, 64-bit
Installation instructions
Custom Instructions for LS_ST_E211_upd_eng.fls:

1. Download the firmware file and place it on a convenient location on your system, example, c:\LS_ST_E211_updeng.fls”.

2. Note the current firmware version of your printer. From the printer’s front panel, press Menu > Reports > Menu Settings Page.

3. Open a FTP connection to the printer. From the Windows’s Command prompt, type: FTP [ip address of printer], example, FTP

4. After the FTP connection has been established, send the firmware file to the printer. From the command prompt, type: PUT “[path to the firmware file]” e.g. PUT “c:\LS_ST_E211_updeng.fls”.

5. The firmware update will take approximately one minute, do not power off or send print job to the printer during this time.

6. The printer will restart itself after firmware update has been completed.

7. The engine firmware version should now be “LS.ST.E211-0”. To confirm, go to either the printer’s EWS (Reports > Device Information) or print the Menu Settings Page again from the printer’s front panel.
My download lists
Sign In

My Download List-#1

Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.