Dell Workgroup Laser Printer S2500 series, v.EN-9XNT, A04

Driver update for Dell S2500 Mono Laser Printer

Fixes & Enhancements

Remove USB support for Window 98 driver


Version EN-9XNT, A04



Release date

02 Jul 2007

Last Updated

03 Nov 2011


Available formats

File Format:Hard-Drive
File Name:S2500_Dell_AAA_Win9xNT_Drivers_en.exe
Download Type:HTTP
File Size: 12 MB
Format Description:This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
Not available
Not available

By downloading, you accept the terms of the Dell Software License Agreement.

Supported Operating Systems
Windows Millennium Edition (Me)
Windows NT 4.0
Installation instructions
Custom Instructions for S2500_Dell_AAA_Win9xNT_Drivers_en.exe:

*** 9X/ME LPT Installation ***

1. Unzip the downloaded file to a directory on your computer
2. Open up the Add Printer Wizard (Start >
Settings > Printers and Faxes > Add Printer)
3. For the Add Printer Wizard, Select "Local Printer", "LPT port".
4. Click the "Have Disk" button and browse to the directory where the drivers has been downloaded.
5. Follow through the rest of the screens to complete the installation.

*** NT Network Installation ***

Note: Since NT does not support USB, you can only install the driver on a network.

1. The Microsoft TCP/IP Printing service must be installed. Skip to step 2 if this service is already installed. Otherwise follow steps A through F below.

To install MS TCP/IP Printing service:
A. Right Click on Network Neighborhood
B. Click "Properties"
C. Select the "Services" tab
D. Click "Add"
E. Select "Microsoft TCP/IP Printing"
F. Restart when prompted

2. Goto Start->Settings->Printers
3. Click the "Add Printer" icon
4. Select the "My Computer" radio button
5. Select "Add Port"
6. Select "LPR Port"
7. Enter the IP Address of the printer and a unique printer name
8. Click "OK" and then "Close"
9. Click "Next" and select "Have Disk"
10. Click "Browse" and search for the path your driver is located (i.e. C:\Dell\Printer\Drivers\Win_NT.40\DKAAGLDA.INF)
11. Click "Open"
12. Click "OK" and then "Next" until you reach the "Finish" screen
13. Click "Finish"
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.