Driver Details

TEAC CA200 HH 13-1 Card Reader, v.4.08, A01

TEAC CA-200 firmware for Enhanced 19-in-1 Media Card Reader

Fixes & Enhancements

19-1 Card Reader Fix: 13-1 Card Readers will sometimes hang with the Green LED illumunated when a memory card is removed, especially if the Card Reader is still reading.

Additional Memory Card Formats supported:
1) SD-HC 8 GB - Secure Digital High Capacity
2) Micro-SD - Micro-size Secure Digital (adaptor required)
3) MS-Micro - Micro-size Memory Stick (adaptor required)

Faster Transfer Rate supported:
4) MMC4 - MultiMedia Card Plus
5) RS-MMC4 - Reduced Size MultiMedia Card
6) MMC Micro - Micro-size MultiMedia Card


Version 4.08, A01


Removable Storage

Release date

08 Jan 2008

Last Updated

03 Nov 2011


Available formats

File Format:Hard-Drive
File Name:R175239.exe
Download Type:HTTP
File Size: 1 MB
Format DescriptionThis file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
Not available
Not available

By downloading, you accept the terms of the Dell Software License Agreement.

Supported Operating Systems
Windows Vista, 32-bit
Windows Millennium Edition (Me)
Windows 2000
Windows Vista, 64-bit
Windows XP
Windows XP, 64-bit
Applies to
CA200 HH 13-1 Card Reader
Installation instructions
Hard Drive Installation (via WinZip) with HTML Pop-Up Window for

1.Click Download Now, to download the file.
2.When the File Download window appears, click Save this program to
disk (Windows XP users, click Save) and click OK. The Save In: window
3.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4.If the Download Complete window appears, click Close. The file
name icon appears on your desktop.

1.Double-click the new icon on the desktop labeled TEAC_CA200-HH-13-1-Card-Read_A01_R175239.exe.
The Self-Extractor window appears.
2.Click OK or Continue.
The Self-Extracting Driver Installation window appears and prompts to
extract files to C:\DELL\DRIVERS\R175239.
3.Leave all of the default settings and click Unzip or OK. If the
directory doesn't exist, you'll be prompted to create one. Click Yes. A
Self Extractor window appears and indicates C:\DELL\DRIVERS\R175239 files were
4.Click OK.
Follow the on-screen installation instructions in the window.

HTML Pop-Up With Install Now Button
1.The Dell Software Installation Documentation window appears.
2.Click the Install Now button. A File Download window appears.
3.Click Run this program from its current location and click OK.
The Security Warning window appears.
4.Click Yes. The InstallShield Wizard window appears.
5.Follow the on-screen instructions.



Click Continue in the Vista - User Account Control popup window.

13-1 Firmware version 4.00 will be updated to 19-1 Firmware version 4.08

After Computer Shutdown, remove the AC plug, and wait for one minute before turning the computer on.

Click Cancel if a Vista - Found New DFU Hardware Widow appears.
Go to C:\DELL\DRIVERS\R175239 and repeat the firmware update.

The message to Shutdown the computer after the firmware update may timeout and disappear.
Without the computer Shutdown, the Card Reader icons will not appear in "Computer" (XP - My Computer).
Shutdown the computer and turn the computer back on after one minute.

If the Card Reader icons still do not appear in "Computer"(XP - My Computer), reinstall the driver.
1. Click Start
2. Right click Computer (XP - My Computer) and select Manage
3. Click Continue in Vista - User Account Control
4. Click Device Manager in Computer Management
5. Expand Universal Serial Bus controllers
6. Right click one a USB Mass Storage Device (CA-200 if the Icon Manager is installed) and select Uninstall
7. Click OK to confirm the Uninstall
8. Wait for a "Your devices are ready to use" message and check for Card Reader icons in "Computer"
For XP Restart the computer to reinstall the USB Driver and check for Card Reader icons in My Computer.

If the Card Reader icons still do not appear in "Computer" (XP - My Computer),
go to C:\DELL\DRIVERS\R175239 and repeat the firmware update.

Important Information
This is a Windows Based Firmware Flash Utility to update the Teac Card Reader
with additional memory card formats (13 --> 19).

Please follow the Install Instructions with this release.
My download lists
Sign In

My Download List-#1

Video Tutorials

Finding Drivers for Your System (00:02:27)
Here's how to find the correct drivers for your system. For more help finding, installing or updating drivers and other software visit or

Drivers help and tutorials

Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).