Driver Details

Dell Media Card Reader with Integrated Bluetooth Module (CAB-200), v.7.08, A00

TEAC CAB-200 firmware for Enhanced 19-in-1 Media Card Reader with Bluetooth

Version

  • Version 7.08, A00

Compatibility

Supported Operating Systems
  • MS Windows Vista 32-bit
  • MS Windows Vista 64-bit

Applies to

Media Card Reader 19-1 with Integrated Bluetooth Module (CAB-200);

Date

Release date
15 Jan 2008
Last Updated
03 Nov 2011

Importance

Recommended. Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Available formats

File Format:Hard-Drive
File Name:R176546.exe
Download Type:HTTP
File Size: 1MB
Format DescriptionThis file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
e0a0228c8c1989cda7ed6b7008247b51
SHA1:
Not available
SHA-256:
Not available

By downloading, you accept the terms of the Dell Software License Agreement.


Important Information

This is a Windows Based Firmware Flash Utility to update the Teac Card Reader
with additional memory card formats (13 --> 19).

Please follow the Install Instructions with this release.

Fixes & Enhancements

19-1 Card Reader Fix: 13-1 Card Readers will sometimes hang with the Green LED illumunated when a memory card is removed, especially if the Card Reader is still reading.

Additional Memory Card Formats supported:
1) SD-HC 8 GB - Secure Digital High Capacity
2) Micro-SD - Micro-size Secure Digital (adaptor required)
3) MS-Micro - Micro-size Memory Stick (adaptor required)

Faster Transfer Rate supported:
4) MMC4 - MultiMedia Card Plus
5) RS-MMC4 - Reduced Size MultiMedia Card
6) MMC Micro - Micro-size MultiMedia Card

Installation instructions

Hard Drive Installation (via WinZip) with HTML Pop-Up Window for
R176546.EXE

Download
1.Click Download Now, to download the file.
2.When the File Download window appears, click Save this program to
disk (Windows XP users, click Save) and click OK. The Save In: window
appears.
3.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4.If the Download Complete window appears, click Close. The file
name icon appears on your desktop.

Install
1.Double-click the new icon on the desktop labeled R176546.EXE.
The Self-Extractor window appears.
2.Click OK or Continue.
The Self-Extracting Driver Installation window appears and prompts to
extract files to C:\DELL\DRIVERS\R176546.
3.Leave all of the default settings and click Unzip or OK. If the
directory doesn't exist, you'll be prompted to create one. Click Yes. A
Self Extractor window appears and indicates C:\DELL\DRIVERS\R176546 files were
extracted.
4.Click OK.
Follow the on-screen installation instructions in the window.

HTML Pop-Up With Install Now Button
1.The Dell Software Installation Documentation window appears.
2.Click the Install Now button. A File Download window appears.
3.Click Run this program from its current location and click OK.
The Security Warning window appears.
4.Click Yes. The InstallShield Wizard window appears.
5.Follow the on-screen instructions.


BEFORE UPDATING FIRMWARE REMOVE ANY MEMORY CARDS FROM THE CARD READER SLOTS.

DO NOT POWER DOWN COMPUTER UNTIL FIRMWARE UPDATE IS COMPLETE.

Click Continue in the Vista - User Account Control popup window.

13-1 Firmware version 7.00 will be updated to 19-1 Firmware version 7.08

After Computer Shutdown, remove the AC plug, and wait for one minute before turning the computer on.

Troubleshooting:
Click Cancel if a Vista - Found New DFU Hardware Widow appears.
Go to C:\DELL\DRIVERS\R176546 and repeat the firmware update.

The message to Shutdown the computer after the firmware update may timeout and disappear.
Without the computer Shutdown, the Card Reader icons will not appear in "Computer".
Shutdown the computer and turn the computer back on after one minute.

If the Card Reader icons still do not appear in "Computer", reinstall the driver.
1. Click Start
2. Right click Computer and select Manage
3. Click Continue in User Account Control
4. Click Device Manager in Computer Management
5. Expand Universal Serial Bus controllers
6. Right click one of the USB Mass Storage Device's and select Uninstall
7. Click OK to confirm the Uninstall
8. Wait for a "Your devices are ready to use" message and check for Card Reader icons in "Computer"

If the Card Reader icons still do not appear in "Computer",
go to C:\DELL\DRIVERS\R176546 and repeat the firmware update.

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more