Driver Details

TSST TS-H493B HH SATA 48X CDRW/DVDROM Firmware Update

This package provides the Windows/DOS Based TSST TS-H493B HH SATA 48X CDRW/DVDROM Firmware Update and is supported on Dimension Desktop, Inspiron Desktop, Optiplex, Precision, Studio Desktop, Vostro Desktop and XPS Desktop models that are running the following Windows Operating Systems: XP, Vista and DOS.

Fixes & Enhancements

Fixes - Not Applicable. Enhancements - Enhanced the read stability of specific autorun media.

Version

Version D400, A03

Release date

20 Oct 2008

Last Updated

05 Mar 2014

Importance

Recommended

Available formats

File Format:Hard-Drive
File Name:TSST_TS-H493B-HH-SATA-48X-CD_A03_R201947.EXE
Download Type:HTTP
File Size: 928KB
Format DescriptionThis file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available

By downloading, you accept the terms of the Dell Software License Agreement.

Supported Operating Systems

MS Windows Vista 32-bit
MS Windows Vista 64-bit
MS Windows XP
MS Windows XP x64

Applies to

TS-H493B HH SATA 48X CDRW/DVDROM

Installation instructions

Custom Instructions for TSST_TS-H493B-HH-SATA-48X-CD_A03_R201947.EXE: Download 1. Click Download File, to download the file. 2. When the File Download window appears, click Save this program to disk and click OK. The Save In: window appears. 3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop. 4. If the Download Complete window appears, click Close. The file icon appears on your desktop. Install (Windows XP and Vista Users) 1. Save all work and be prepared to reboot the system after flashing the drive. Double-click the new icon on the desktop labeled TSST_TS-H493B-HH-SATA-48X-CD_A03_R201947.EXE. 2. The Self-Extracting window appears and prompts you to extract or unzip to "C:\DELL\DRIVERS\R201947". Write down this path so the executable (i.e. Setup.exe) file can be found later. 3. The Self-Extractor window appears. 4. Click OK. 5. After completing the file extraction, if the Self-Extractor window is still open, close it. 6. The Windows Flash utility, SFDNWIN, for the TSST TS-H493B drive will automatically launch. 7. If a "Drive not found" message pops up, then the system is not detecting the TSST TS-H493B drive. Check to make sure the TSST TS-H493B drive is properly installed. 8. The SFDNWIN flash utility window will appear. Click on the round folder icon on the extreme top left corner of the SFDNWIN window. 9. Navigate to the folder "C:\DELL\DRIVERS\R201947". 10. Select 493BD400.BIN. 11. Click on the "Flash to Drive" icon next to the folder icon on the top left of the SFDNWIN window. (It is the 2nd of the three icons on the top left of the SFDNWIN window). 12. Wait for the flash process to complete. 13.Acknowledge reboot request to reboot system. Install (DOS Users) 1. Double-click the new icon on the desktop labeled TSST_TS-H493B-HH-SATA-48X-CD_A03_R201947.EXE. 2. The Self-Extracting window appears and prompts you to extract or unzip to "C:\DELL\DRIVERS\R201947". Write down thispath so the executable (I.e. Setup.exe) file can be found later. 3. The Self-Extractor window appears. 4. Click OK. 5. After completing the file extraction, if the Self-Extractor window is still open, close it. 6. The Windows Flash utility, SFDNWIN, for the TSST TS-H493B drive will automatically launch. Close the SFDNWIN. On other OSes, the SFDNWIN utility may fail to launch. 7. Navigate to the folder "C:\DELL\DRIVERS\R201947\DOS". 8. Copy the files "SFDNDOS.EXE" and "493BD400.BIN" to a bootable DOS floppy or flash disk. 9. Boot to DOS. 10. Navigate to the location where "SFDNDOS.EXE" and "493BD400.BIN" are located on the DOS floppy or Flash disk. 11. Enter "SFDNDOS 493BD400.BIN" at the DOS prompt. 12. Follow the instructions to complete the flash process and reboot after flash process is complete.

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more
This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details
Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).