Driver Details

Dell OpenManage HIP 3.5.2 Update for NNM SE & Server Console Trap Message, A01-00

Dell OpenManage Hardware Instrumentation Package 3.5.2 Update for NNM SE &
Server Console Trap Message

Fixes & Enhancements

This update allows PowerEdge servers to report correctly the systems management information related to power supply to the management console using the Dell OpenManage HIP version 3.5.2.


Version A01-00, A01-00


Systems Management

Release date

13 Oct 2000

Last Updated

03 Nov 2011



Available formats

File Format:Hard-Drive
File Name:HIPS6up1.exe
Download Type:HTTP
File Size: 452KB
Format DescriptionThis file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
Not available
Not available

By downloading, you accept the terms of the Dell Software License Agreement.

Supported Operating Systems

Novell Netware
Windows NT 4.0
Windows 2000

Applies to

OpenManage HIP 3.5.2 Update for NNM SE & Server Console Trap Message

Installation instructions

To update the Dell OpenManage HIP version 3.5.2 on managed node servers
running either Microsoft Windows 2000 Server Family or Windows NT, perform
the following steps:

1. In Windows Explorer, double-click the file "dbagt001.exe" located in
the self-extracting zip file (HIPS6up1.exe).
2. Click "Update". When the update finishes, a completion message box

To update the Dell OpenManage HIP 3.5.2 on systems running Novell NetWare
version 4.x or 5.x, perform the following steps:

NOTE: If you have not rebooted your system since you first installed Dell
OpenManage HIP, the following update procedure will not work.

1. Unload the Dell baseboard agent by entering the command: "unload
2. Map a disk drive from a workstation to the path on the PowerEdge system
running the Novell NetWare 4.x or 5.x operating system's "sys
3. Copy the updated baseboard agent with the command:
Copy x:\bin\dcbase.nlm y:\system\dell\dcbase.nlm (where x:\ is the
location of the extracted files and y:\ is the mapped drive on the server).
4. Reboot the Dell system.

Important Information

NOTICE: You must install Dell OpenManage HIP 3.5.2 before installing this update.

NOTICE: When applying this update, install it on managed node servers only.

Do not install this update on the management station (the system that is running the HP OV NNM SE management console).
My Download List-#1 (0 )

Drivers help and tutorials

Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.​

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more
This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details
Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.