Dell SAN Appliance Patch, v., A00

This patch is to be loaded on PowerVault 530F systems at version 1.22 or 1.24. This version can be verified by connection to the PV 530F using VNC. The corresponding software versions are and

Fixes & Enhancements

This patch includes fixes for the following issues:

* Booting server through PV530F does not work when both redundant-primary and redundant-failover are powered on. See the "boot.txt" document included in this patch.

* IP mirror breaks and stays disconnected and IO stops after IP mirror disconnect and update.

* IP mirror disabled after full resync.


Version, A00


Fibre Channel

Release date

14 Dec 2000

Last Updated

03 Nov 2011


Available formats

File Format:Hard-Drive
File Name:pv530fp2.exe
Download Type:HTTP
File Size: 621 KB
Format Description:This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
Not available
Not available

By downloading, you accept the terms of the Dell Software License Agreement.

Installation instructions
Unzip the attached PV530Fp2.exe file. Detailed installation instructions are included in the Readme.txt file.
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.