Get to know Windows 2012

Explore new features and learn how to get the most out of your Windows System

Learn more

Driver Details

Dell Server System BIOS, A06

900 MHz B0 Stepping BIOS for PE8450.

Fixes & Enhancements

BIOS Release A06 contains B0 microcode to support 900MHz processors on
PE8450.

Version

Version A06, A06

Release date

28 Mar 2001

Last Updated

03 Nov 2011

Importance

Optional

Available formats

File Format:Hard-Drive
File Name:B6899R06.exe
Download Type:HTTP
File Size: 738KB
Format DescriptionThis file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available

By downloading, you accept the terms of the Dell Software License Agreement.

Compatible Systems

Supported Operating Systems

BIOS

Applies to

Server System BIOS

Installation instructions

This utility must be executed in a system without memory managers
installed.
If EMM386, QEMM, 386MAX, or Windows is active, then the FLASH update
is not safe. Remove any memory manager or exit Windows before executing
the FLASH Memory Update Utility.



I. BIOS Update
---------------

To update the BIOS, do the following:

1. Note the settings of the SETUP parameters. Enter SETUP by hitting
the F2 key during boot up. Write down the settings for each of
parameters. At the end of the BIOS update process you should set
the parameters to default values by hitting the F9 key, and then
re-enter these values you have written down.

2. Insert the BIOS Update Diskette into drive A:.

3. Reset the system.

4. System boots the BIOS Update Diskette.

5. Choose option 1 to update the BIOS.

6. System will automatically reboot once the BIOS update is completed.
Please remove the floppy diskette from drive A:.

7. Check to make sure the BIOS version is the new version as the
system reboots.

8. Enter Setup by pressing the F2 key during boot up. Once in Setup,
press the F9 to set the parameters back to default values.
Re-enter the values you wrote down at the beginning of this process.
If you do not set the CMOS values back to defaults using the F9
key, the system may function erratically.


II. BIOS Recovery
------------------

To recover the BIOS from a corrupted Flash or bad BIOS update, do the
following:

1. Turn system power off.

2. Move the BIOS recovery Switch number 2 to the recovery (ON) position.

3. Insert the BIOS recovery diskette containing the latest BIOS files
including user binary file.

4. Turn system power on.

5. At this point, the system boots from the DOS-bootable recovery
diskette without video display. BIOS emit one beep when it passes
control to DOS. DOS then execute a AUTOEXEC.BAT that contains
IFLASH.EXE. It emits one high pitched beep to indicate the beginning
of the flash operation. After it recovers system BIOS, it emits two
high pitched beeps. Then it recovers user binary code. It emits two
high pitched beeps to indicate the recovery completed successfully. If
the recovery fails, it emits a continuous series of beeps. The entire
process takes between three to five minutes.

6. Turn system power off.

7. Remove the recovery diskette.

8. Restore the switch to the original position.

9. Turn system power on for normal operation.


Note: you may encounter a CMOS Checksum error or other problem after
reboot. Try shutting down the system and booting up again. CMOS
checksum errors require that you enter Setup, check your settings, save
your settings, and exit Setup.

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more
This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details
Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.