Driver Details

Samsung PM800 FDE 64GB THM SATA2 SSD, PM800 FDE 128GB THM SATA2 SSD, PM800 FDE 256GB THM SATA2 SSD, v.VBM9MD1Q/VBM95D1Q , A00

Recommend customer to use this new FW for resolve the performance degrade issue when SSD getting full

Version

  • Version VBM9MD1Q/VBM95D1Q, A00

Compatibility

Supported Operating Systems
  • MS Windows 7 32-bit
  • MS Windows 7 64-bit
  • MS Windows Vista 32-bit
  • MS Windows Vista 64-bit
  • MS Windows XP
  • MS Windows XP x64

Applies to

PM800 FDE 128GB THM SATA2 SSD;

Date

Release date
01 Aug 2010
Last Updated
03 Nov 2011

Importance

Recommended. Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Available formats

File Format:Hard-Drive
File Name:SAMSUNG_MULTI-DEVICE_A00_R276533.exe
Download Type:HTTP
File Size: 1MB
Format DescriptionThis file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available

By downloading, you accept the terms of the Dell Software License Agreement.


Important Information

[Warning]
“DEVICE MUST BE PLUGGED IN AT ALL TIMES DURING THE FIRMWARE UPDATE PROCESS OR ELSE DEVICE MAY BE PERMANENTLY DAMAGED AND RENDERED INOPERABLE.?

"YOU MUST BACK UP ALL DATA ON THE DRIVE AS THE FIRMWARE UPDATE PROCESS WILL ERASE ALL PRE-EXISTING DATA"

Fixes & Enhancements

Initial Release

Installation instructions

Custom Instructions for SAMSUNG_MULTI-DEVICE_A00_R276533.exe:

(Preparation)
1. Extract all provided zip files to the Bootable USB Drive (extract to the root directory).
This will create a DSRD folder on the USB drive.
2. Restart your PC and Press "F2" to enter System BIOS. Select -->System Configuration--> SATA Operation --> AHCI or ATA.
3. Under Boot Sequence set USB as the first boot device in the boot order (Refer to your system user guide).
4. Apply changed settings and power off the system.


(Applying Firmware Update)
1. Insert USB boot key and power on the system.
i) Check boot priority settings in your system BIOS if your system fails to boot from USB drive.
ii) DSRD application will execute only in IDE and AHCI modes of ATA / SATA /AHCI controllers. If it fails to run, check the BIOS setting for SATA Operation and ensure it is set to ATA or AHCI mode.

2. Execute DOSRD1_0.EXE in DSRD folder.
3. The message ¡°Samsung electronics FW Download Utility¡± will appear. Press any key to continue.
4. FW Utility will automatically detect your SSD and if a FW upgrade candidate is detected, the device name with old FW version will be displayed. Do not press any key at this time.
5. When the following prompt will appears ¡±Download FW on this disk?¡±, please press ¡®y¡¯ and hit ¡®enter¡¯ to continue.
6. A prompt will remind you to backup all data and ask you ¡±Do you want to continue?¡±, please press ¡®y¡¯. Before hitting ¡®enter,¡¯ please verify that you have backed up all pre-existing data on the device. This will begin the download process.
7. Once download is complete, the message will appear ¡°Firmware has been successfully upgraded!¡±

[WARNING]
Even if the progression dot appears to have completed DO NOT PRESS ANY OTHER KEY such as ESC, Power Button, etc unless you see the "Firmware has been successfully updated!!"
8. DSRD will automatically terminate after firmware update completion.
9. Turn off the system power after firmware update has completed. You now have latest firmware version on your SSD!
10. Restart your PC and press "F2" to entering BIOS setting, Select -->System Configuration-->SATA operation, choose the original setting used prior to applying firmware update. Note: Factory default is IRRT or RAID.

Additional Notes:
1.The download tool will skip the firmware update process if the upgraded firmware version is already installed on the drive.
2.If you execute DSRD again when your SSD has the latest FW, you will see messaging that the same firmware revision exist on the drive and the tool will skip the firmware update process.

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more