Driver Details

Samsung F3 7200 3.5" SATA2 HDD Firmware Update

This package provides the Samsung F3 250GB/500GB/750GB/1TB 7200 3.5" SATA2 HDD Firmware Update and is supported on Vostro Desktop, Precision, Optiplex, Inspiron Desktop, Dimension Desktop, Studio Desktop, Alienware Desktop and Studio XPS Desktop models that are running the following Operating Systems: XP, Vista and Windows 7.

Version

Version 1AJ10002, A00

Applies to

F3 1TB 7200 3.5" SATA2 HDD;

Date

Release date
6/16/2011
Last Updated
3/5/2014

Importance

Urgent. Dell highly recommends applying this update as soon as possible. The update contains changes to improve the reliability and availability of your Dell system.

Available formats

File Format:Hard-Drive
File Name:F3_Patch.zip
Download Type:HTTP
File Size: 765KB
Format DescriptionThis file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
20da6b1c656915c190cba5ece9b1649e
SHA1:
Not available
SHA-256:
Not available

By downloading, you accept the terms of the Dell Software License Agreement.


Important Information

1. Please Do Not interrupt the firmware upgrade process! 2. [Warning] Device must be plugged in at all times during the firmware update process or else device may be permanently damaged and rendered inoperable. 3. It is recommended that you back up the data on your disk drive prior to firmware update as a precaution in case of inadvertent power loss or system restart.

Fixes & Enhancements

Fixes - Fixed an issue that cause intermittent boot problems Enhancements - Not Applicable

Installation instructions

Custom Instructions for F3_Patch.zip: This firmware download utility runs in DOS. 1. Unzip the file F3_Patch.zip to your bootable USB key. 2. Run the F3_Patch.exe file form your bootable key. 3. You will notice that the current FW is 1AJ10001, after flash it will become 1AJ10002 (but this can only be done after reboot and re-run step 2). 4. Reboot the system after flashed. 5. Please take note the PC will halted sometimes as the BIOS is trying to detect the HDD, force reboot again if you see this situation. 6. Once reboot successful, you will be able to go into Windows, Windows will detect your new HDD again. 7. Last reboot from the Windows after detection completed, restart and FW is now 002 version.

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more