Dell NMC,UPS,FW (H910P), v.01.10.0005, A03

UPS Firmware for Network Management Card

Fixes & Enhancements

Corrects the following:

SSL certificate handling fixed to now only issue a new certificate if the IP address changes so that the user does not get prompted with a certificate warning message with every communication reset or restart of the card. NOTE: The warning security warning message issued by browsers is normal when entering SSL mode because the NMC uses a self-certified.

Fixed issue that could limit the number of NMS allowable to less than 3. Now the user can always configure 1, 2 or 3 Network Monitoring Services (NMS) as intended.

Firmware now checks to see if a configured username and password is using restricted extended ASCII codes and alerts users that they are not permitted. This ASCII character checking was missing in the previous Firmware which could potentially allow a user to lock them out of the card if they used an unsupported


Version 01.10.0005, A03



Release date

21 Oct 2011

Last Updated

03 Nov 2011


Available formats

File Format:Hard-Drive
File Name:DELL_NMC-UPS-FW--H910P-_A03_R318026.exe
Download Type:HTTP
File Size: 1 MB
Format Description:This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
Not available
Not available
Not available

By downloading, you accept the terms of the Dell Software License Agreement.

Supported Operating Systems
Red Hat Ent Linux 2.1
Red Hat Ent Linux 3
Red Hat Ent Linux 4
Red Hat Linux 7.0
Red Hat Linux 7.1
Red Hat Linux 7.2
Red Hat Linux 7.3
Red Hat Linux 8.0
Red Hat Linux 9.0
Windows Vista, 32-bit
Windows Server 2003
Windows Vista, 64-bit
Windows XP
Windows Server 2003 x64
Windows XP, 64-bit
Installation instructions
Hard Drive Installation (via WinZip) with Setup.exe File for DELL_NMC-UPS-FW--H910P-_A03_R318026.EXE


1.Click Download Now, to download the file.
2.When the File Download window appears, click Save (Windows XP
users will click Save) this program to disk and click OK. The Save In:
window appears.
3.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4.If the Download Complete window appears, click Close. The file
icon appears on your desktop.


1.Double-click the new icon on the desktop labeled DELL_NMC-UPS-FW--H910P-_A03_R318026.EXE.
2.The Self-Extracting window appears and prompts you to extract or
unzip to C:\DELL\DRIVERS\R318026. Write down this path so the executable (I.e.
Setup.exe) file can be found later.
3.The Self-Extractor window appears.
4.Click OK.
5.After completing the file extraction, if the Self-Extractor
window is still open, close it.
6.Click the Start button and then click Run.
7.Type C:\DELL\DRIVERS\R318026 in the Open textbox and then click OK.
8.Follow the on-screen installation instructions.
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).