Driver Details

Samsung SC-148C 48X CD-ROM, v. C005, A03

Firmware update for "Samsung SC148C 48X CD ROM Drive" Dell P/N 9J255, 9J256

Version

Version C005, A03

Compatibility

Operating Systems
  • MS Windows 98
  • MS Windows ME
  • MS Windows NT 3.5x
  • MS Windows NT 4.0
  • MS Windows 2000
  • MS Windows XP

Applies to

SC-148C 48X CD-ROM;

Date

Release date
2/12/2002
Last Updated
11/3/2011

Importance

Optional. Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.

Available formats

File Format:Floppy
File Name:D9J25503.exe
Download Type:HTTP
File Size: 373KB
Format DescriptionThis file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available

By downloading, you accept the terms of the Dell Software License Agreement.


Important Information

Firmware update for "Samsung SC 148C 48X CDROM Drive" Dell P/N 9J255, 9J256

The update will create a bootable diskette that must be used under DOS
(not under Windowed DOS box). This flash will update the drive's firmware
to C005 The user will need to remove the floppy disc and then reboot the
system before using the drive.

If the firmware reflash fails ( e.g., system hangs, etc. ), reboot the
system and try again at least twice.

Fixes & Enhancements

This firmware addresses a time delay issue with the SC-148C drive during
POST. The firmware will speed up the PC's overall boot time.

Installation instructions

* Follow these steps to install
You will need a blank formatted 1.44MB floppy disk to proceed with the
flashing process.

Steps to flash drive:

1. Download the D9J25503.exe file to a known directory.

2. Once the download is complete, navigate to the file and double click on it to run the executable.

3. Follow the instruction prompts provided.

4. Once the flash disk has been created, restart your computer with the floppy in drive A. The flash process will begin automatically.

5. Follow the instructions provided by the flash disk.

6. Once the flash process has been completed successfully, remove the diskette and reboot the system.

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more