Driver Details

Dell IEEE 1394 Firmware , A01

The A01 version of IEEE 1394 Firmware Update contains the support necessary to create a IEEE 1394 bootable CD for use on systems which support IEEE 1394 CD drives as bootable devices.

** 1394_A01.iso creates a bootable CD disk updating the IEEE 1394 Firmware. THIS IMAGE IS TO FLASH THE IEEE 1394 FIMWARE OF THE DELL X200
ONLY**

The ISO image file uses Windows 98 DOS and IEEE 1394 CD drivers.

Version

  • Version A01, A01

Compatibility

Compatible Systems
Supported Operating Systems
  • BIOS

Applies to

IEEE 1394 Firmware;

Date

Release date
21 Oct 2002
Last Updated
03 Nov 2011

Importance

Optional. Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.

Available formats

File Format:Hard-Drive
File Name:1394_A01.EXE
Download Type:HTTP
File Size: 743KB
Format DescriptionThis file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available

By downloading, you accept the terms of the Dell Software License Agreement.


Important Information

THIS FILE IS TO FLASH THE IEEE 1394 FIMWARE OF THE DELL X200 ONLY
------------------------------------------------------------------
PLEASE CONNECT POWER ADAPTER AND BATTERY WITH FULL CHARGE
------------------------------------------------------------------
PLEASE REMOVE ALL DEVICES ATTACHED TO SYSTEM BEFORE FLASH STARTS
------------------------------------------------------------------
WHEN THE SYSTEM DISPLAYS MESSAGE THAT FLASH HAS COMPLETED
------------------------------------------------------------------
REMOVE THE CD-ROM AND RE-START THE SYSTEM
------------------------------------------------------------------
FOR ISSUES CONTACT Dell Customer Support at www.support.dell.com

Fixes & Enhancements

- This release allows the IEEE1394 Firmware update to be run on a system without a Floppy Drive attached.

Installation instructions

Please follow these instructions:

**Note: You will require a CDRW and a CD burning software such as Roxio
Easy CD Creator 5 in order to use this file to create a Bootable CD to
update the IEEE 1394 Firmware.**

1. Download the file to your hard drive.
2. Place a blank CD-ROM in your CDRW.
3. Double-Click on the "1394_A01.iso" file.
4. The file should automatically launch the CD burning software.
5. Select th option to "Start Recording".
6. The CD burning software will create a bootable CD with the 1394
Firware Update.
7. Click OK to exit the application.
8. Close all applications on you desktop and restart your system while
the Boot CD is present in the CD-ROM Drive.
9. You computer will boot to the CD and ask to,"Press any key to
continue..." to update the Firmware.
10. Press Enter. The Firware will be updated at this time.
11. Remove CD-ROM and reboot you computer.

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more