Driver Details

NEC ND-1100A 4X DVD+R/2.4X DVD+RW, v.10GE, A04

This is a firmware update for the NEC ND-1100A 4X DVD+RW drive. This update application will update the firmware on the drive to version '10GE'.

Fixes & Enhancements

1) Improves writability of black CD-R media
2) Improves readability and writability of DVD+RW media

Version

Version 10GE, A04

Release date

13 Aug 2003

Last Updated

03 Nov 2011

Importance

Optional

Available formats

File Format:Hard-Drive
File Name:R59801.EXE
Download Type:HTTP
File Size: 853KB
Format DescriptionThis file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available

By downloading, you accept the terms of the Dell Software License Agreement.

Supported Operating Systems

MS Windows 2000
MS Windows XP

Applies to

ND-1100A 4X DVD+R/2.4X DVD+RW

Installation instructions

Custom Instructions for R59801.EXE:

Follow these steps to update the firmware on the NEC ND-1100A 4X
DVD+RW drive.
1. Check to see if the tray is closed and that there is no media in the
NEC DVD+RW drive.
2. Download the R59801.EXE file from the Dell website to a known
directory.
3. Double click on the file R59801.EXE
4. Go to the directory and double-click on the R59801.EXE file that was
downloaded.
5. Click on "Continue".
6. Follow the instructions for unzipping the files.
7. The update utility will launch automatically. Click on "Flash" to update
the firmware on the drive. **Please do not interrupt the update process by accessing the drive.
8. Reboot the system when update is complete.

Important Information

1. This is a Windows-based flash utility. If the following products exist on the system, please un-
install these products prior to proceeding with the firmware update. If installed, these products are found in "Control Panel" under "Add or Remove Programs".
  • Intel Ultra-ATA Storage Driver
  • Intel Application Accelerator


    2. This only applies if the configuration of the device was modified by the end-user. If this
    device is configured as a Master device in combination with a Slave device on the IDE bus, please
    disable the Slave device via Device Manager.


    3. When update is in progress, please do not interrupt the update process by accessing the drive.

  • My Download List-#1 (0 )

    Drivers help and tutorials

    My download lists

    My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
    Learn more
    This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details
    Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.