Accton HP Switch, v.1.1, A02

This self-extracting file contains PE1655MC network switch utilities Rev A02.

Fixes & Enhancements

Initial Release

Only Private MIB is changed in corresponding with new feature enhancement of Class of Service (CoS).


Version 1.1, A02



Release date

21 Oct 2003

Last Updated

03 Nov 2011


Available formats

File Format:Hard-Drive
File Name:NwSwitchMIBA02.exe
Download Type:HTTP
File Size: 111 KB
Format Description:This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
Not available
Not available
Not available

By downloading, you accept the terms of the Dell Software License Agreement.

Installation instructions
Custom Instructions for NwSwitchMIBA02.exe:

1. Download this self-extract file into a floppy disk
2. Copy the file into your SNMP protocol based management station

Extract Files:
1. Double click this self-extract file and unzip the MIB files into a user-defined directory.
This user-defined directory should allow the MIB files to be properly compiled into user's SNMP browser, or SNMP-based management software. Please check the manual of the user's SNMP browser for this specific directory to contain MIB files.
2. Follow MIB compiling procedure defined in user's SNMP browser or SNMP based management software to compile the MIB files
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.