Driver Details

Linux SLES10 SP4 Driver 00.00.05.39-1 for PERC H310 / H710 / H710P / H810 Controllers.

Linux SLES10 SP4 Driver 00.00.05.39-1 for PERC H310 / H710 / H710P / H810 Controllers.

Fixes & Enhancements

Linux Megaraid_sas driver for SLES10SP4.

Version

Version 00.00.05.39-1, A13

Category

SAS RAID

Release date

11 Nov 2014

Last Updated

21 Nov 2014

Importance

Recommended

Available formats

File Format:Rel-Notes-Text
File Name:SLES10SP4-megaraid_sas-00.00.05.39-1.txt
Download Type:HTTP
File Size: 2KB
Format DescriptionThis file format contains plain text which can be viewed with a standard text editor.
To ensure the integrity of your download, please verify the checksum value.
MD5:
dfc03c23e88096424fc293dd897811cf
SHA1:
b979bb5874e39e380756edb384e073a0721ea6cf
SHA-256:
Not available
File Format:GNU-Zip
File Name:SLES10SP4-megaraid_sas-00.00.05.39-1.tar.gz
Download Type:HTTP
File Size: 4MB
Format DescriptionThis format consists of gnu zip files for software installation.
To ensure the integrity of your download, please verify the checksum value.
MD5:
ca4fe5666b21b3c0228b9dc0fceab3c9
SHA1:
a428cf8c3216b4ff86afece80f34554ef7cf4941
SHA-256:
Not available

By downloading, you accept the terms of the Dell Software License Agreement.

Supported Operating Systems

Suse Linux ES 10

Applies to

PERC H310 Adapter
PERC H310 Embedded
PERC H310 Mini Blade
PERC H310 Mini Monolithic
PERC H710 Adapter
PERC H710 Mini Blade
PERC H710 Mini Monolithic
PERC H710P Adapter
PERC H710P Mini Blade
PERC H710P Mini Monolithic
PERC H810 Adapter

Installation instructions

The driver package is a compressed tar file.

To extract the components within the tar file, un-tar the files: # tar -xvzf

Extracted files should contain the following:
- dkms rpm (dkms-.rpm)
- driver rpm (megaraid_sas-.rpm)
- source code (megaraid_sas--src.tgz)

Updating the Driver:

The SLES10SP4 native (in-box) driver is for OS installation only. The driver must be upgraded once the OS installation is done.

1. Install the DKMS rpm package if needed. Use this command
# rpm -ivh

NOTE: Use rpm -Uvh when updating an existing package.

2. Install the Driver package. Use this command
# rpm -ivh

3. Verify the driver has been loaded with this system command:
# modinfo megaraid_sas

and this dkms command:
# dkms status

The version shown in the output should match in both cases and with the version of the package.

Important Information

Power State Transitions:

Note that system power state transitions are not validated on Dell platforms under Linux Operating Systems.


DKMS AUTOINSTALL:

DKMS AUTOINSTALL option should always be disabled in the DKMS configuration file for driver installation.
My Download List-#1 (0 )

Drivers help and tutorials

Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.​

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more
This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details
Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).