Driver Details

Dell PowerVault 120T DLT Autoloader, v.D116, A01

Firmware for the Dell PowerVault 120T DLT4000/7000 autoloader.

This release contains firmware for the autoloader, DLT4000 tape drive, and DLT7000 tape drive.

Fixes & Enhancements

No fixes/enhancements. This is a repackaging of previously released firmware.


Version D116, A01


Tape Drives

Release date

23 Jul 2004

Last Updated

03 Nov 2011


Available formats

File Format:Hard-Drive
File Name:R82137.EXE
Download Type:HTTP
File Size: 4 MB
Format Description:This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
Not available
Not available
Not available

By downloading, you accept the terms of the Dell Software License Agreement.

Other versions
d116,D116 24 Jul 20009:19:01 AM
Installation instructions
Custom Instructions for R82137.EXE:

Note: In order to execute this file, it must be downloaded to a system running Microsoft Windows with an unzip utility installed.

1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.

Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to upzip the files (the default location is x:\dell\drivers\R82137).
4. Click on the OK button to extract files.
5. After a few seconds a dialog box will appear that says that all files were successfully unzipped. Click OK to exit from the installer.

1. Locate the readme.htm file in the directory to which you unzipped the files. This file contains the installation instructions for the files listed below:

NOTE: x: represents the drive where the files were unzipped

PowerVault 120T Tape Autoloader Application Code D116 is located in x:\Dell\Drivers\R82137\Autoloader
PowerVault 120T DLT4000 Tape Drive Firmware D782 (v130) is located in x:\Dell\Drivers\R82137\DLT4000
PowerVault 120T DLT7000 Tape Drive Firmware 2561 (v97) is located in x:\Dell\Drivers\R82137\DLT7000
My download lists
Sign In

My Download List-#1

Drivers help and tutorials

Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.