Driver Details

Dell PERC S300 Adapter, PERC S300 Integrated Modular, v.2.0.0-0166+00193000 FW , A06

Dell PERC S300 Integrated Modular/ Adapter (Firmware)

Version

Other versions
1.0.0-0084+00193000,A01 12 Jan 20128:14:27 AM
1.0.1-0021+00193000,A03 12 Jan 20123:47:59 AM

Applies to

PERC S300 Adapter;

Date

Release date
04 Feb 2013
Last Updated
24 May 2013

Importance

Recommended. Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Available formats

File Format:Update Package for Microsoft® Windows®
File Name:SAS-RAID_Firmware_RPCKX_WN32_2.0.0-016600193000_A06.EXE
Download Type:HTTP
File Size: 4MB
Format DescriptionDell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
12fa4c9c41fda045590b0f106f846795
SHA1:
54b019b223f864cc9e04125132878644947f0bc1
SHA-256:
Not available
File Format:Hard-Drive
File Name:DELL_MULTI-DEVICE_A06_R300048.exe
Download Type:HTTP
File Size: 560KB
Format DescriptionThis file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
70a93ad6351769bd297b8411f9cf63ad
SHA1:
e2de00232f4dfe563c11c2dea61a7575f20766f3
SHA-256:
32e08962205790b5fbe1a8cf9703107f1854262d3d301686df1199b25d896aa6
File Format:Rel-Notes-Text
File Name:R300048.txt
Download Type:HTTP
File Size: 2KB
Format DescriptionThis file format contains plain text which can be viewed with a standard text editor.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
2e91713843a6ba716ec237a747efd1da
SHA1:
Not available
SHA-256:
Not available

By downloading, you accept the terms of the Dell Software License Agreement.


Important Information

The firmware upgrade may fail if any of the RAID controllers in the system are performing an I/O background task (that is, consistency check, background initialization, rebuild, or reconstruction). Allow the background task to complete before attempting to upgrade the firmware. Patrol Read tasks will not affect a firmware upgrade.

* Linux systems running one or more applications that interact with SCSI devices in certain ways are known to cause a kernel panic situation. Therefore, it is recommended that you stop Server Administrator and its Storage Management Service before running storage controller firmware update packages.

To stop the Dell OpenManage(TM) Server Administrator service,
run "omconfig system webserver action=stop"

To start the Server Administrator service,
run "omconfig system webserver action=start"

To stop the Server Administrator Storage Management Service,
run "/etc/init.d/dataeng stop"

To start the Server Administrator Storage Management Service,
run "/etc/init.d/dataeng start"

Fixes & Enhancements

- Fix for the System Inventory Collection (RSOD)Red Screen of Death with a S300 controller

- Background Array Scan

- Boot to RD1000 Tape

- Consistency Check startup on existing virtual disks after a new virtual disk is created

- Default VD cache policy is changed to "No caching"

- Support for CougarPoint chipset for S100

- New System support for S300: Coaster, Diamas and Skipper, Slinky

- UEFI boot enablement

Installation instructions

Performing the Firmware Upgrade

NOTE: This initial section of the Installation Instructions applies only to configurations with (greater than) 2TB SEDs.

1. Update the firmware version to this version using preferred method below (Zip Pack, Windows DUP, Linux DUP).
2. Reboot for the new FW take effect
3. Un-assign any (greater than) 2TB SED Dedicated or Global Hot Spares in the configuration. Not all configurations have hot spares.
4. Use CTRL-R or OMSS to issue Instant Secure Erase to all un-configured (greater than) 2TB SED drives (all data in these drives will be lost)
5. Re-assign (greater than) 2TB SED Hot Spares.

Zip pack:

Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your
hard drive.

Extract Files
1. Browse to the location where you downloaded the file and double-click the
new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click onthe OK button to extract files.
After the files are extracted the message all files were successfully
unzipped will appear.
5. Click the OK button to exit from the installer.

Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute update.bat to perform flash.
5. After flash is complete, remove bootable media.
4. Reboot system for changes to take effect.


Windows Update Package:

Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click Save to save the file to
your hard drive.

Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window
before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.


Linux Update Package:

Download
1. Click the Download Now linkto download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation
1. Read over the release information presented by executing the
./FRMW_LX_RXXXXXX.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before
proceeding.
3. Run the update by executing ./FRMW_LX_RXXXXXX.BIN from the shell.
4. Follow the remaining prompts to perform the update.

GnuPG Signature of Dell Update Package Instructions for FRMW_LX_RXXXXXX.BIN:

Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file, FRMW_LX_RXXXXXX.BIN.

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more