Dell PowerVault 110T LTO2, v.3AYC, A02

Firmware for the PowerVault 110T LTO2 Tape Drive version 3AYC.

Firware update utility LTO-TDX included with release.
Support for Windows 2000, 2003, 2003-64bit and Red Hat Linux included

R90080 (this release) is the same firmware found in R82372. It has been repackaged with a Windows utility fix for a bluescreen when running in a ROMB raid/SCSI environment and is still referred to as A02 firmware release.

Fixes & Enhancements

PowerVault 110T LTO2 Tape Drive Firmware 3AYC
Previous version: 333N

*Prevents existing data from being overwritten when using a LTO Gen 1 tape that was formatted by a different drive manufacturer
*Corrected improper capacity reporting in some backup software
*Reduces read/write errors under specific conditions


Version 3AYC, A02


Tape Drives

Release date

27 Apr 2005

Last Updated

03 Nov 2011


Available formats

File Format:Hard-Drive
File Name:R90080.EXE
Download Type:HTTP
File Size: 1 MB
Format Description:This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
Not available
Not available
Not available

By downloading, you accept the terms of the Dell Software License Agreement.

Other versions
3AYC,A02 09 Jul 20041:24:13 PM
Supported Operating Systems
Red Hat Ent Linux 2.1
Red Hat Ent Linux 3
Red Hat Linux 7.3
Red Hat Linux 8.0
Red Hat Linux 9.0
Windows Server 2003
Windows 2000
Windows Powered
Applies to
KIT, TB, 200GB, EXT, LTO2, V5
PowerVault 110T LTO2
Installation instructions

Hard Drive Installation (via WinZip) with HTML Pop-Up Window for

1.Click Download Now, to download the file.
2.When the File Download window appears, click Save this program to
disk (Windows XP users, click Save) and click OK. The Save In: window
3.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4.If the Download Complete window appears, click Close. The file
name icon appears on your desktop.

1.Double-click the new icon on the desktop labeled R90080.EXE.
The Self-Extractor window appears.
2.Click OK or Continue.
The Self-Extracting Driver Installation window appears and prompts to
extract files to C:\DELL\DRIVERS\R90080.
3.Leave all of the default settings and click Unzip or OK. If the
directory doesn't exist, you'll be prompted to create one. Click Yes. A
Self Extractor window appears and indicates C:\DELL\DRIVERS\R90080 files were
4.Click OK.
Follow the on-screen installation instructions in the window.

HTML Pop-Up With Install Now Button
1.The Dell Software Installation Documentation window appears.
2.Click the Install Now button. A File Download window appears.
3.Click Run this program from its current location and click OK.
The Security Warning window appears.
4.Click Yes. The InstallShield Wizard window appears.
5.Follow the on-screen instructions.

Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell highly recommends applying this update as soon as possible. The update contains changes to improve the reliability and availability of your Dell system.